Browse Helix Models and Effects

Helix currently supports 111 amplifier models, 276 effects, 56 speaker cab models, and 16 microphones. On top of all that you also have the ability to load Impulse Responses (IRs) that you can grab from free or paid sources. Go have fun.

Ampeg Octo Comp (Ampeg Opto Comp)

Released With Helix Version 3.15
Ampeg Octo Comp, the Helix model of a Ampeg Opto Comp

Based on the Ampeg Opto Comp compressor pedal.


  • Compress — This is actually a ratio control, which controls the amount of compression. At 0.0, the ratio is 1:1; at 5.0, the ratio is at 3:1, and at 10.0, the ratio is at 10:1
  • Release — Controls how long it takes for the compressor to stop reducing gain. At 0.0, the release is 75 ms; at 10.0, the release is around 600 ms
  • Mix — Controls the wet/dry mix of the compressor. When set to 0%, no compressed signal is heard; when set to 100%, no dry signal is heard
  • Level — Sets the overall level of the block

Description source: Line 6


PEDALBOARD

This preset is my take on a natural sound as if you had real pedals going straight in to your amp. hope you enjoy it!

  • 👇 Downloads: 89
  • 🤘 Upvotes: 1
  • Member: E.L.I.O
  • Performance Type:
    Plugged in Front of the Amp


Patch Performance
Type		 Description Member 👇 Downloads 🤘 Upvotes
PEDALBOARD Plugged in Front of the Amp This preset is my take on a natural sound as if you had real pedals going straight in to your amp. hope you enjoy it! E.L.I.O 89 1
Comments    

There are no comments for this yet.

Some Products That We Love

Brought to you by the Fluid Solo department of Commerce

Power your HX Stomp via USB

This handy cord allows you to power your HX Stomp from a USB port, so you can power it from a USB power bank or other power source.

Power your HX Stomp via USB

Last seen around $23

Use a Mic with your HX Stomp

The HX Stomp and Helix LT don't have a mic input like the Helix Floor, but this adapter allows you to plug your Mic into the Aux Return as set up guitar/vocal patches such as this one.

Use a Mic with your HX Stomp

Last seen around $19

Add some Footswitches to your Rig

A simple and cost effective way to add 2 additional footswitches to your HX Stomp or other HX device. Yes, including Pod Go! Please be advised that you will also need a TRS type 1/4 inch cable to use both switches.

Add some Footswitches to your Rig

Last seen around $22