Browse Helix Models and Effects

Helix currently supports 111 amplifier models, 276 effects, 56 speaker cab models, and 16 microphones. On top of all that you also have the ability to load Impulse Responses (IRs) that you can grab from free or paid sources. Go have fun.

Hall (Line 6® Original)

Hall, the Helix model of a Line 6® Original

Simulates the sound of a concert hall or large open space with a strong reverb tail. Imagine a gymnasium, performance hall, or cathedral.

Description source: Line 6


Twin Diana

Lovely clean Twin and Dhyana for some (or more) overdrive. Also trem and delay in front, and some boosts after the amp.

  • 👇 Downloads: 173
  • 🤘 Upvotes: 2
  • Member: Maxdb
  • Device:
    Helix LT
  • Performance Type:
    Direct (Recording, Headphone, PA)


Badonkater 8

Built for an 8 String guitar using the Badonk and Placater Clean models. 4 Snaps -- Clean, Clean Ambient, Thump, and Dirty. One stomp on FS11 for Lead Solo.

  • 👇 Downloads: 162
  • 🤘 Upvotes: 0
  • Member: Alex Kenivel
  • Device:
    Helix Floor
  • Performance Type:
    Direct (Recording, Headphone, PA)


Patch Device Performance
Type
Description Member 👇 Downloads 🤘 Upvotes
Twin Diana Helix LT Direct (Recording, Headphone, PA) Lovely clean Twin and Dhyana for some (or more) overdrive. Also trem and delay in front, and some boosts after the amp. Maxdb 173 2
Badonkater 8 Helix Floor Direct (Recording, Headphone, PA) Built for an 8 String guitar using the Badonk and Placater Clean models. 4 Snaps -- Clean, Clean Ambient, Thump, and Dirty. One stomp on FS11 for Lead Solo. Alex Kenivel 162 0
Comments    

There are no comments for this yet.

Some Products That We Love

Brought to you by the Fluid Solo department of Commerce

Tonex Headphone Amp

Tonex has arrived as a handy rechargeable headphone amp. The mobile application makes it simple to load new tone models from the cloud.

Tonex Headphone Amp

Last seen at $149

Put Some Pedal Toppers On!

Pedal toppers make switching easier by giving you more surface area for your feet.

Put Some Pedal Toppers On!

Last seen around $9 for a ten-pack

Add some Footswitches to your Rig

A simple and cost effective way to add 2 additional footswitches to your HX Stomp or other HX device. Yes, including Pod Go! Please be advised that you will also need a TRS type 1/4 inch cable to use both switches.

Add some Footswitches to your Rig

Last seen around $22