Browse Helix Models and Effects

Helix currently supports 72 amplifier models, 194 effects, 37 speaker cab models, and 16 microphones. On top of all that you also have the ability to load Impulse Responses (IRs) that you can grab from free or paid sources. Go have fun.

Line 6 Elmsley (Line 6 Original)

Line 6 Elmsley, the Helix model of a Line 6 Original

The Line 6 Elmsley is a new Line 6 original amplifier that employs a parallel distortion topology that layers distinct saturation characteristics across the lower and upper registers. The Elmsley features a smooth and present bottom end with some exceptional sparkle and definition all through the midrange and above. The result is an amplifier that is dazzling across the full spectrum, and the amplifier deals with pedals in spades.

"The other new key feature of The Elmsley's power amp section is the Negative Feedback (NFB) parameter, where the amount of feedback within the power section's response can be dialed anywhere from wild and unhinged, tight and punchy, and anything in between. As with many amplifier designs, the presence and depth controls are part of this negative feedback circuit and functions to control the brilliance and resonance of the power amp, respectively. As the NFB param is reduced, the presence and depth controls' influences are also influenced, and they become effectively deactivated when the NFB knob is at zero. These interactions allow the player to create countless tonal variations to suit their needs.”

—Sam Hwang, Sound Designer

Description source: Line 6
Image source: Line 6


There are no comments for this yet.

Some Products That We Love

Brought to you by the Fluid Solo department of Commerce

A Handy Rechargeable Tuner

Those snark-y headstock tuners are great, but it gets old changing out those coin-sized batteries. This rechargeable unit makes tuning a breeze.

A Handy Rechargeable Tuner

Last seen at $29

Add some Footswitches to your Rig

A simple and cost effective way to add 2 additional footswitches to your HX Stomp or other HX device. Yes, including Pod Go! Please be advised that you will also need a TRS type 1/4 inch cable to use both switches.

Add some Footswitches to your Rig

Last seen around $22

Power your HX Stomp via USB

This handy cord allows you to power your HX Stomp from a USB port, so you can power it from a USB power bank or other power source.

Power your HX Stomp via USB

Last seen around $23