Browse Helix Models and Effects

Helix currently supports 72 amplifier models, 194 effects, 37 speaker cab models, and 16 microphones. On top of all that you also have the ability to load Impulse Responses (IRs) that you can grab from free or paid sources. Go have fun.

A30 Fawn Brt (Vox® AC-30 Fawn (bright channel))

A30 Fawn Brt, the Helix model of a Vox® AC-30 Fawn (bright channel)

Recorded using a Gretsch Silver Falcon. Default amp and cab settings, spring reverb added. Used same performance to capture the tone of all Vox amps in the Helix.

The Beatles were the first to make the Vox AC30 famous. This particular model does not have the "Top Boost" mod added. That is a separate amp model, the "Essex A30" in the Helix. The name comes from the original coloring of the amps, which was tan/beige. The Beatles later asked for the amps to be covered in black to match their stage shows.

This model covers the sound of the "bright" input on the amp. For a darker tone, try the "A30 Fawn Nrm" model.

Image source: GuitarGiraffe.com


AC 30 Tone for Boss Katana Amps

Use this patch by plugging straight into a Katana 50. Use the acoustic channel on the amp, and keep all Katana settings at noon, and adjust to taste. This patch uses the "A30 Fawn Brt" Helix model for a chimey AC30 tone. Use the Klon for some nice hot overdrive. There's some spring reverb included to round out the tone. Sounds great on the Katana combo.

  • 👇 Downloads: 531
  • 🤘 Upvotes: 3
  • Member: Jorge
  • Performance Type:
    Plugged in Front of the Amp


Beatles Day Tripper

Built this patch with a little help from my friends. Pretty straightforward. I want to try to achieve a little more of tha ADT - which provides a cool delay/leslie effect. Hope you enjoy, as always, I'm very open to feedback and comments. The video is from my Stems practice sessions.

Youtube
  • 👇 Downloads: 483
  • 🤘 Upvotes: 2
  • Member: Kalimar
  • Performance Type:
    Direct (Recording, Headphone, PA)


  • 👇 Downloads: 34
  • 🤘 Upvotes: 0
  • Member: Johanndjent
  • Performance Type:
    Direct (Recording, Headphone, PA)


Patch Performance
Type
Description Member 👇 Downloads 🤘 Upvotes
AC 30 Tone for Boss Katana Amps Plugged in Front of the Amp Use this patch by plugging straight into a Katana 50. Use the acoustic channel on the amp, and keep all Katana settings at noon, and adjust to taste. This patch uses the "A30 Fawn Brt" Helix model for a chimey AC30 tone. Use the Klon for some nice hot overdrive. There's some spring reverb includ… Jorge 531 3
Beatles Day Tripper
Youtube
Direct (Recording, Headphone, PA) Built this patch with a little help from my friends. Pretty straightforward. I want to try to achieve a little more of tha ADT - which provides a cool delay/leslie effect. Hope you enjoy, as always, I'm very open to feedback and comments. The video is from my Stems practice sessions. Kalimar 483 2
VOX AC30 - YOUNG Direct (Recording, Headphone, PA) YoungYT Johanndjent 34 0
Comments    

There are no comments for this yet.

Some Products That We Love

Brought to you by the Fluid Solo department of Commerce

Add some Footswitches to your Rig

A simple and cost effective way to add 2 additional footswitches to your HX Stomp or other HX device. Yes, including Pod Go! Please be advised that you will also need a TRS type 1/4 inch cable to use both switches.

Add some Footswitches to your Rig

Last seen around $22

Power your HX Stomp via USB

This handy cord allows you to power your HX Stomp from a USB port, so you can power it from a USB power bank or other power source.

Power your HX Stomp via USB

Last seen around $23

Use a Mic with your HX Stomp

The HX Stomp and Helix LT don't have a mic input like the Helix Floor, but this adapter allows you to plug your Mic into the Aux Return as set up guitar/vocal patches such as this one.

Use a Mic with your HX Stomp

Last seen around $19