Browse Helix Models and Effects
Helix currently supports 111 amplifier models, 276 effects, 56 speaker cab models, and 16 microphones. On top of all that you also have the ability to load Impulse Responses (IRs) that you can grab from free or paid sources. Go have fun.
Tube Echo (Maestro® Echoplex EP-1)
Released With Helix Version 2.50 Legacy Model
The classic 1963 Maestro® EP-1 was the first of a series of “Echoplex” designs distributed by the company, and made by HarrisTeller in Chicago. As touted in a Maestro advertisement, the Echoplex’s “...special effects range all the way from a controlled high speed reverberation to a full, throbbing echo”!
The main feature of the Echoplex design is a special cartridge of looped 1/4” tape that wraps past separate record and playback heads.
Description source: Line 6
Image source: Regis Coyne
Bayou
Some pod X3 recarnations on Helix.
- 👇 Downloads: 107
- 🤘 Upvotes: 1
- Member: Arislaf
- Performance Type:
Direct (Recording, Headphone, PA)
Speak the Name
testin 4 david
- 👇 Downloads: 87
- 🤘 Upvotes: 0
- Member: Jhgrosse97
- Performance Type:
Direct (Recording, Headphone, PA)
| Patch | Performance Type |
Description | Member | 👇 Downloads | 🤘 Upvotes |
|---|---|---|---|---|---|
| Bayou | Direct (Recording, Headphone, PA) | Some pod X3 recarnations on Helix. | Arislaf | 107 | 1 |
| Speak the Name | Direct (Recording, Headphone, PA) | testin 4 david | Jhgrosse97 | 87 | 0 |
Comments
There are no comments for this yet.
Some Products That We Love
Brought to you by the Fluid Solo department of CommerceA Handy Rechargeable Tuner
Those snark-y headstock tuners are great, but it gets old changing out those coin-sized batteries. This rechargeable unit makes tuning a breeze.
Last seen at $29
Add some Footswitches to your Rig
A simple and cost effective way to add 2 additional footswitches to your HX Stomp or other HX device. Yes, including Pod Go! Please be advised that you will also need a TRS type 1/4 inch cable to use both switches.
Last seen around $22
Extra Power Cable for your HX Stomp
I've been using one of these power supplies permanently zip-tied to my pedalboard, and it's been very handy to keep the original power supply around for off-board usage. Plus it's cheap and works well.
Last seen around $16