Browse Helix Models and Effects

Helix currently supports 72 amplifier models, 194 effects, 37 speaker cab models, and 16 microphones. On top of all that you also have the ability to load Impulse Responses (IRs) that you can grab from free or paid sources. Go have fun.

1x12 Cali IV (1x12" MESA Boogie® Mk IV)

1x12 Cali IV, the Helix model of a 1x12" MESA Boogie® Mk IV

This cabinet model is the sound of the Mesa Mark IV combo amp with a single 12 inch speaker.


On the Mark

A nice fat clean tone using the Mark IV Rhythm channel. There's a second snapshot that's dirtier as well, but I'm not 100% happy with it.

Soundcloud
  • 👇 Downloads: 647
  • 🤘 Upvotes: 4
  • Member: Jorge
  • Performance Type:
    Direct (Recording, Headphone, PA)


God Tone with Looper

Incredible clean and dirty tones in one patch with lots of different applications.Clean Mark amp with 2 stages of Overdrive - a Parametric EQ pushed the amp into overdrive, and a Timmy pedal pushes it out into full distortion. No snapshots, I find the pedal assignments can do the job.

  • 👇 Downloads: 861
  • 🤘 Upvotes: 2
  • Member: Jorge
  • Performance Type:
    Direct (Recording, Headphone, PA)


Oh Ingrid

Derailed Ingrid patch, showing the Trainwreck amp model of the Helix. The Dhyana Drive is included, but not enabled by default. I have been making good use of the "Double Take" modulation effect, it adds a lot of body to the sound through headphones. If you're playing into a PA or direct recording, you may want to turn off this effect.You can hear various degrees of distortion in the Soundcloud demo - I didn't change anything except the attack of my pick.In the Soundcloud demo I am playing a Les Paul standard with a Burstbucker in the bridge.

Soundcloud
  • 👇 Downloads: 344
  • 🤘 Upvotes: 1
  • Member: Jorge
  • Performance Type:
    Direct (Recording, Headphone, PA)


Phil X Pod Go

This patch is based off of the information on this post on The Gear Page. It's a simple Placater dirty amp into a delay. The amp settings are identical to those in the discussion, and instead of an IR, this version uses a stock cab. Adjust to taste, as always.

  • 👇 Downloads: 427
  • 🤘 Upvotes: 1
  • Member: Jorge
  • Performance Type:
    Direct (Recording, Headphone, PA)


Patch Performance
Type
Description Member 👇 Downloads 🤘 Upvotes
On the Mark
Soundcloud
Direct (Recording, Headphone, PA) A nice fat clean tone using the Mark IV Rhythm channel. There's a second snapshot that's dirtier as well, but I'm not 100% happy with it. Jorge 647 4
God Tone with Looper Direct (Recording, Headphone, PA) Incredible clean and dirty tones in one patch with lots of different applications.Clean Mark amp with 2 stages of Overdrive - a Parametric EQ pushed the amp into overdrive, and a Timmy pedal pushes it out into full distortion. No snapshots, I find the pedal assignments can do the job. Jorge 861 2
Oh Ingrid
Soundcloud
Direct (Recording, Headphone, PA) Derailed Ingrid patch, showing the Trainwreck amp model of the Helix. The Dhyana Drive is included, but not enabled by default. I have been making good use of the "Double Take" modulation effect, it adds a lot of body to the sound through headphones. If you're playing into a PA or direct recording,… Jorge 344 1
Phil X Pod Go Direct (Recording, Headphone, PA) This patch is based off of the information on this post on The Gear Page. It's a simple Placater dirty amp into a delay. The amp settings are identical to those in the discussion, and instead of an IR, this version uses a stock cab. Adjust to taste, as always. Jorge 427 1
Comments    

There are no comments for this yet.

Some Products That We Love

Brought to you by the Fluid Solo department of Commerce

Rechargeable 9V for your Pedals & Active Pickups

These 9V batteries have a built-in USB-C port for charging. We use them to power pedals and active pickups while creating less waste.

Rechargeable 9V for your Pedals & Active Pickups

Last seen around $16

Power your HX Stomp via USB

This handy cord allows you to power your HX Stomp from a USB port, so you can power it from a USB power bank or other power source.

Power your HX Stomp via USB

Last seen around $23

Add some Footswitches to your Rig

A simple and cost effective way to add 2 additional footswitches to your HX Stomp or other HX device. Yes, including Pod Go! Please be advised that you will also need a TRS type 1/4 inch cable to use both switches.

Add some Footswitches to your Rig

Last seen around $22