Browse Helix Models and Effects
Helix currently supports 111 amplifier models, 276 effects, 56 speaker cab models, and 16 microphones. On top of all that you also have the ability to load Impulse Responses (IRs) that you can grab from free or paid sources. Go have fun.
Analog Flanger (MXR® Flanger)
Released With Helix Version 2.50 Legacy Model
Inspired by the classic MXR® Flanger.
Description source: Line 6
Raging Tom
That classic Tom Morello setup for Pod Go! If you enjoy my free tones check out my premium tones for Helix, HX Stomp, and Pod Go on the Line 6 Marketplace. Shamelessly borrowed from CustomTone.com to have a few patches available for Pod Go launch.
- 👇 Downloads: 969
- 🤘 Upvotes: 6
- Member: Jorge
- Device:
Pod Go - Performance Type:
Direct (Recording, Headphone, PA)
Heretick Riffs
My current personal metal riffing sound, based on the Line 6 Fatality. Tight and percussive, but in a thrashy way. No cab modeling, since I use my Pod Go into a power amp into a Vintage 30 equipped cab.
- 👇 Downloads: 487
- 🤘 Upvotes: 3
- Member: Heretick
- Device:
Pod Go - Performance Type:
Plugged in Front of the Amp
| Patch | Device | Performance Type |
Description | Member | 👇 Downloads | 🤘 Upvotes |
|---|---|---|---|---|---|---|
| Raging Tom | Pod Go | Direct (Recording, Headphone, PA) | That classic Tom Morello setup for Pod Go! If you enjoy my free tones check out my premium tones for Helix, HX Stomp, and Pod Go on the Line 6 Marketplace. Shamelessly borrowed from CustomTone.com to have a few patches available for Pod Go launch. | Jorge | 969 | 6 |
| Heretick Riffs | Pod Go | Plugged in Front of the Amp | My current personal metal riffing sound, based on the Line 6 Fatality. Tight and percussive, but in a thrashy way. No cab modeling, since I use my Pod Go into a power amp into a Vintage 30 equipped cab. | Heretick | 487 | 3 |
Comments
There are no comments for this yet.
Some Products That We Love
Brought to you by the Fluid Solo department of CommercePocket NAM Multi-Effects Player
The Sonicake Pocket Master can play NAM captures, and is available for a ridiculous low price. A great way to test the waters with NAM amp captures.
Last seen for about $65
Add some Footswitches to your Rig
A simple and cost effective way to add 2 additional footswitches to your HX Stomp or other HX device. Yes, including Pod Go! Please be advised that you will also need a TRS type 1/4 inch cable to use both switches.
Last seen around $22
Power your HX Stomp via USB
This handy cord allows you to power your HX Stomp from a USB port, so you can power it from a USB power bank or other power source.
Last seen around $23