Browse Helix Models and Effects

Helix currently supports 111 amplifier models, 276 effects, 56 speaker cab models, and 16 microphones. On top of all that you also have the ability to load Impulse Responses (IRs) that you can grab from free or paid sources. Go have fun.

Brit Plexi Jump (Marshall® Super Lead 100 (jumped))

Brit Plexi Jump, the Helix model of a Marshall® Super Lead 100 (jumped)

Recorded with a Les Paul Standard, Seymour Duncan Alnico Pro II pickup in bridge position. Default amp and cab settings used for tone sample.

The Marshall Super Lead 100 is the Marshall Plexi. This amp contains the classic tones of Clapton and Hendrix. Try it with both humbuckers and single coils.

This model recreates the amp tone derived from "jumping" the 2 amp channels for a more distorted sound.

Image source: Pinterest.com


Ambient Rock

The patch has three presets which are for switching sounds while soloing. The first preset is a light overdrive, the second light overdrive plus echo, and the third light overdrive plus distortion. See the example below for a soloing example. I also added a noise gate to help reduce the noise.

Youtube
  • 👇 Downloads: 959
  • 🤘 Upvotes: 7
  • Member: Rabbuhl
  • Performance Type:
    Direct (Recording, Headphone, PA)


Marshall Tone for Boss Katana 50

Use this patch by plugging straight into a Katana 50. Use the acoustic channel on the amp, and keep all Katana settings at noon, and adjust to taste. This patch uses the "Brit Plexi Jump" Helix model for a nice juicy Marshall roar thru your Katana.

  • 👇 Downloads: 491
  • 🤘 Upvotes: 4
  • Member: Jorge
  • Performance Type:
    Plugged in Front of the Amp


Patch Performance
Type
Description Member 👇 Downloads 🤘 Upvotes
Ambient Rock
Youtube
Direct (Recording, Headphone, PA) The patch has three presets which are for switching sounds while soloing. The first preset is a light overdrive, the second light overdrive plus echo, and the third light overdrive plus distortion. See the example below for a soloing example. I also added a noise gate to help reduce the noise. Rabbuhl 959 7
Marshall Tone for Boss Katana 50 Plugged in Front of the Amp Use this patch by plugging straight into a Katana 50. Use the acoustic channel on the amp, and keep all Katana settings at noon, and adjust to taste. This patch uses the "Brit Plexi Jump" Helix model for a nice juicy Marshall roar thru your Katana. Jorge 491 4
Comments    

There are no comments for this yet.

Some Products That We Love

Brought to you by the Fluid Solo department of Commerce

Pocket NAM Multi-Effects Player

The Sonicake Pocket Master can play NAM captures, and is available for a ridiculous low price. A great way to test the waters with NAM amp captures.

Pocket NAM Multi-Effects Player

Last seen for about $65

Add some Footswitches to your Rig

A simple and cost effective way to add 2 additional footswitches to your HX Stomp or other HX device. Yes, including Pod Go! Please be advised that you will also need a TRS type 1/4 inch cable to use both switches.

Add some Footswitches to your Rig

Last seen around $22

Put Some Pedal Toppers On!

Pedal toppers make switching easier by giving you more surface area for your feet.

Put Some Pedal Toppers On!

Last seen around $9 for a ten-pack