Browse Helix Models and Effects
Helix currently supports 111 amplifier models, 276 effects, 56 speaker cab models, and 16 microphones. On top of all that you also have the ability to load Impulse Responses (IRs) that you can grab from free or paid sources. Go have fun.
Chrome Custom (Modded Vox® V847)
Based on a modded Vox® V847 that has the gain staging on the first transistor stage tweaked, and aftermarket inductor, the Q widened, and replaced with a 470k pot.
Description source: Line 6
Bonamassa Live
This is a modified version of bart2580's "Bonamassa 1959LP" patch on customtone. I modified it to use a built-in cab rather an an IR, and made a few smaller tweaks as well. The delay is very present in the mix, so you my want to tame it a bit, I like it.
Soundcloud- 👇 Downloads: 486
- 🤘 Upvotes: 4
- Member: Jorge
- Performance Type:
Direct (Recording, Headphone, PA)
PEDALBOARD
This preset is my take on a natural sound as if you had real pedals going straight in to your amp. hope you enjoy it!
- 👇 Downloads: 115
- 🤘 Upvotes: 1
- Member: E.L.I.O
- Performance Type:
Plugged in Front of the Amp
asdf asd
asdasda asd
- 👇 Downloads: 88
- 🤘 Upvotes: 0
- Member: Merlin
- Performance Type:
Direct (Recording, Headphone, PA)
| Patch | Performance Type |
Description | Member | 👇 Downloads | 🤘 Upvotes |
|---|---|---|---|---|---|
|
Bonamassa Live
Soundcloud |
Direct (Recording, Headphone, PA) | This is a modified version of bart2580's "Bonamassa 1959LP" patch on customtone. I modified it to use a built-in cab rather an an IR, and made a few smaller tweaks as well. The delay is very present in the mix, so you my want to tame it a bit, I like it. | Jorge | 486 | 4 |
| PEDALBOARD | Plugged in Front of the Amp | This preset is my take on a natural sound as if you had real pedals going straight in to your amp. hope you enjoy it! | E.L.I.O | 115 | 1 |
| asdf asd | Direct (Recording, Headphone, PA) | asdasda asd | Merlin | 88 | 0 |
Comments
There are no comments for this yet.
Some Products That We Love
Brought to you by the Fluid Solo department of CommerceAdd some Footswitches to your Rig
A simple and cost effective way to add 2 additional footswitches to your HX Stomp or other HX device. Yes, including Pod Go! Please be advised that you will also need a TRS type 1/4 inch cable to use both switches.
Last seen around $22
Extra Power Cable for your HX Stomp
I've been using one of these power supplies permanently zip-tied to my pedalboard, and it's been very handy to keep the original power supply around for off-board usage. Plus it's cheap and works well.
Last seen around $16
Put Some Pedal Toppers On!
Pedal toppers make switching easier by giving you more surface area for your feet.
Last seen around $9 for a ten-pack