Browse Helix Models and Effects
Helix currently supports 72 amplifier models, 194 effects, 37 speaker cab models, and 16 microphones. On top of all that you also have the ability to load Impulse Responses (IRs) that you can grab from free or paid sources. Go have fun.
Elephant Man (Electro-Harmonix® Deluxe Memory Man)
Recorded with a Les Paul with a variation of the "Glam PRS" patch available on this site.
This is the Helix remastered model of the EHX Deluxe Memory man, an awesome vintage delay pedal from the late 70's - early 80's.
The Elephant Man model differs from the legacy "Analog w/ Mod" model by having additional parameters, stereo capability, and a Chorus/Vibrato toggle.
- 👇 Downloads: 180
- 🤘 Upvotes: 1
- Member: Jorge
- Performance Type:
Direct (Recording, Headphone, PA)
Hellbound Fender for Powercab
This tone is an attempt to capture the live tone of one of my favorite guitarists, Luis from Hellbound Hayride. It's a juicy, dirty Fender sound with some delay and reverb. The tone does not have a cab emulation in it, it uses the Powercab for that.Powercab SettingsSet the Powercab to the "Vintage" (Celestion Vintage 30) speaker emulation and turn it up!
Soundcloud- 👇 Downloads: 376
- 🤘 Upvotes: 1
- Member: Jorge
- Performance Type:
Line 6 Powercab
| Patch | Performance Type |
Description | Member | 👇 Downloads | 🤘 Upvotes |
|---|---|---|---|---|---|
|
Dirty Chords
Soundcloud |
Direct (Recording, Headphone, PA) | Dual amp mid-gain patch. | Jorge | 180 | 1 |
|
Hellbound Fender for Powercab
Soundcloud |
Line 6 Powercab | This tone is an attempt to capture the live tone of one of my favorite guitarists, Luis from Hellbound Hayride. It's a juicy, dirty Fender sound with some delay and reverb. The tone does not have a cab emulation in it, it uses the Powercab for that.Powercab SettingsSet the Powercab to the… | Jorge | 376 | 1 |
Comments
There are no comments for this yet.
Some Products That We Love
Brought to you by the Fluid Solo department of CommerceAdd some Footswitches to your Rig
A simple and cost effective way to add 2 additional footswitches to your HX Stomp or other HX device. Yes, including Pod Go! Please be advised that you will also need a TRS type 1/4 inch cable to use both switches.
Last seen around $22
Rechargeable 9V for your Pedals & Active Pickups
These 9V batteries have a built-in USB-C port for charging. We use them to power pedals and active pickups while creating less waste.
Last seen around $16
Power your HX Stomp via USB
This handy cord allows you to power your HX Stomp from a USB port, so you can power it from a USB power bank or other power source.
Last seen around $23