Browse Helix Models and Effects
Helix currently supports 72 amplifier models, 194 effects, 37 speaker cab models, and 16 microphones. On top of all that you also have the ability to load Impulse Responses (IRs) that you can grab from free or paid sources. Go have fun.
PV Panama (Peavey® 5150®)
Featuring two channels, a 120 watt all-tube 6L6 power section and a shared EQ, the 5150 was able to produce a variety of rock and metal tones. The rhythm channel could be set clean or crunchy, but the lead channel is what this amp is famous for. With its super high-gain sound, it could be used for anything from tight and aggressive metal riffs to blistering lead tones. This led to the 5150 II with separate EQs for each channel, which made the amp even more versatile. In 2004, EVH parted ways with Peavey and the amp was rebranded as the 6505 and 6505+.
Description source: reverb.com
EVH 5150
This Eddie Van Halen Patch uses his modern 5150 amp style.
- 👇 Downloads: 650
- 🤘 Upvotes: 7
- Member: Jorge
- Performance Type:
Direct (Recording, Headphone, PA)
- 👇 Downloads: 298
- 🤘 Upvotes: 3
- Member: Jorge
- Performance Type:
Direct (Recording, Headphone, PA)
Green Day Brain Stew
I made this patch to play along to Brain Stew Stem files. Did a little research on the internet and came across Wampler's video where he works out that tone. He uses the EVH 5150 MXR pedal. I figured, that's just trying to emulate the amp we have in Helix so why not just use the PV Panama :D I think it worked well. I turned up the noise gate to get that tight tone for the chords.I hope you enjoy and would love any feedback you have.
Youtube- 👇 Downloads: 232
- 🤘 Upvotes: 2
- Member: Kalimar
- Performance Type:
Direct (Recording, Headphone, PA)
5150 Crunch Lead Wah
Super fun 5150 patch... not for chugging but is a great hard rock patch. It has 3 snapshots... 1. Rhythm 2. Lead 3. Lead with auto wah. This was made with my PowerCab Plus using a York Audio IR so you will need to keep that in mind. Enjoy!!!
- 👇 Downloads: 319
- 🤘 Upvotes: 1
- Member: Mystixboi
- Performance Type:
Line 6 Powercab
| Patch | Performance Type |
Description | Member | 👇 Downloads | 🤘 Upvotes |
|---|---|---|---|---|---|
| EVH 5150 | Direct (Recording, Headphone, PA) | This Eddie Van Halen Patch uses his modern 5150 amp style. | Jorge | 650 | 7 |
|
Angry 5150
Soundcloud |
Direct (Recording, Headphone, PA) | This pissed off 5150 is perfect for detuned metal chord work. | Jorge | 298 | 3 |
|
Green Day Brain Stew
Youtube |
Direct (Recording, Headphone, PA) | I made this patch to play along to Brain Stew Stem files. Did a little research on the internet and came across Wampler's video where he works out that tone. He uses the EVH 5150 MXR pedal. I figured, that's just trying to emulate the amp we have in Helix so why not just use the PV Panama :D I thin… | Kalimar | 232 | 2 |
| 5150 Crunch Lead Wah | Line 6 Powercab | Super fun 5150 patch... not for chugging but is a great hard rock patch. It has 3 snapshots... 1. Rhythm 2. Lead 3. Lead with auto wah. This was made with my PowerCab Plus using a York Audio IR so you will need to keep that in mind. Enjoy!!! | Mystixboi | 319 | 1 |
Comments
There are no comments for this yet.
Some Products That We Love
Brought to you by the Fluid Solo department of CommerceProtect Your Ears
These earplugs are designed for musicians, providing a better audio experience than traditional foam plugs. Plus, they come in a cool aluminum case.
Last seen around $40
Extra Power Cable for your HX Stomp
I've been using one of these power supplies permanently zip-tied to my pedalboard, and it's been very handy to keep the original power supply around for off-board usage. Plus it's cheap and works well.
Last seen around $16
Add some Footswitches to your Rig
A simple and cost effective way to add 2 additional footswitches to your HX Stomp or other HX device. Yes, including Pod Go! Please be advised that you will also need a TRS type 1/4 inch cable to use both switches.
Last seen around $22