Browse Helix Models and Effects

Helix currently supports 72 amplifier models, 194 effects, 37 speaker cab models, and 16 microphones. On top of all that you also have the ability to load Impulse Responses (IRs) that you can grab from free or paid sources. Go have fun.

SV Beast Nrm (Ampeg® SVT® (normal channel))

SV Beast Nrm, the Helix model of a Ampeg® SVT® (normal channel)

Recorded using the default amp and cab settings for this model. The performance was recorded using an ESP "The Surveyor" bass using both J and P bass pickups set all the way on. A little touch of reverb added for depth. All Helix bass amp demos use the same performance, for easy comparison.

Since 1969, the Ampeg SVT has been the amp that set the standard for bass amplification. The SVT-CL is arguably one of the most popular bass heads ever, with users ranging from P-Funk to KISS and all points in between. The harmonically rich sound and legendary performance of the Ampeg SVT are redefined in the SVT Classic. This dynamically powerful all-tube bass amp delivers a thunderous 300 watts of unsurpassed quality, reliability, and tonal flexibility. Although other companies have tried to capture the classic all-tube sound of '60s and '70s Ampeg bass heads, no one can touch the SVT.

This model is for the amp's "normal" channel. Try the "bright" model for more brightness and clarity.


Black Rusty Bass Tone

This tone is modeled on the bass guitar chain of Rusty Sanchez, bassist for Black Monday. It's a straight ahead rock and roll bass tone of a SansAmp into an SVT.

Soundcloud
  • 👇 Downloads: 758
  • 🤘 Upvotes: 6
  • Member: Jorge
  • Performance Type:
    Direct (Recording, Headphone, PA)


Patch Performance
Type
Description Member 👇 Downloads 🤘 Upvotes
Black Rusty Bass Tone
Soundcloud
Direct (Recording, Headphone, PA) This tone is modeled on the bass guitar chain of Rusty Sanchez, bassist for Black Monday. It's a straight ahead rock and roll bass tone of a SansAmp into an SVT. Jorge 758 6
Comments    

There are no comments for this yet.

Some Products That We Love

Brought to you by the Fluid Solo department of Commerce

Add some Footswitches to your Rig

A simple and cost effective way to add 2 additional footswitches to your HX Stomp or other HX device. Yes, including Pod Go! Please be advised that you will also need a TRS type 1/4 inch cable to use both switches.

Add some Footswitches to your Rig

Last seen around $22

Rechargeable 9V for your Pedals & Active Pickups

These 9V batteries have a built-in USB-C port for charging. We use them to power pedals and active pickups while creating less waste.

Rechargeable 9V for your Pedals & Active Pickups

Last seen around $16

Power your HX Stomp via USB

This handy cord allows you to power your HX Stomp from a USB port, so you can power it from a USB power bank or other power source.

Power your HX Stomp via USB

Last seen around $23