Browse Helix Models and Effects

Helix currently supports 72 amplifier models, 194 effects, 37 speaker cab models, and 16 microphones. On top of all that you also have the ability to load Impulse Responses (IRs) that you can grab from free or paid sources. Go have fun.

Tube Drive (Chandler Tube Driver)

Tube Drive, the Helix model of a Chandler Tube Driver

Recorded using a Les Paul with Burstbucker pickups into a Twin Reverb model with the normal input. The overdrive pedal and amp are set at default settings. A touch of reverb added for depth.

This is the "legacy" model of the Chandler Tube Driver, from the M-Series effects.

Line 6's original model guide describes this overdrive pedal as "delivering the sweet singing sustain craved by guitarists worldwide".

Description source: Line 6
Image source: reverb.com


MM Blues pack

There are 4 snapshots, which covers a lot : 1. "Clean" - slightly compressed, sparky bluesy tone which sounds very nice on neck pickup and is reactive to playing dynamic. 2. "Gritty", same as previous just with some more compression. 3. "Crunch" , tight distorted sound with sufficient clarity, good for range of styles from blues, rock to hard rock, 4. "Lead", singing distorted lead sound with lot of sustain but also with sufficient clarity, which is not too aggressive and cuts nicely through the mix. Sounds nice either on humbuckers or single coil pups, (tested on low, mid and high resistance pups ranging from 7.5 K to 15 K). You can find examples of my patches on the channel youtube.comSnapshot 2 and  here:  youtu.be

Soundcloud
  • 👇 Downloads: 432
  • 🤘 Upvotes: 6
  • Member: Mvmilosevic
  • Performance Type:
    Direct (Recording, Headphone, PA)


Patch Performance
Type
Description Member 👇 Downloads 🤘 Upvotes
MM Blues pack
Soundcloud
Direct (Recording, Headphone, PA) There are 4 snapshots, which covers a lot : 1. "Clean" - slightly compressed, sparky bluesy tone which sounds very nice on neck pickup and is reactive to playing dynamic. 2. "Gritty", same as previous just with some more compression. 3. "Crunch" , tight distorted sound with sufficient clarity, good… Mvmilosevic 432 6
Comments    

There are no comments for this yet.

Some Products That We Love

Brought to you by the Fluid Solo department of Commerce

Add some Footswitches to your Rig

A simple and cost effective way to add 2 additional footswitches to your HX Stomp or other HX device. Yes, including Pod Go! Please be advised that you will also need a TRS type 1/4 inch cable to use both switches.

Add some Footswitches to your Rig

Last seen around $22

Extra Power Cable for your HX Stomp

I've been using one of these power supplies permanently zip-tied to my pedalboard, and it's been very handy to keep the original power supply around for off-board usage. Plus it's cheap and works well.

Extra Power Cable for your HX Stomp

Last seen around $16

Expand your effects with HX One

The HX One gives you the world of Line 6's effects in a compact pedal. It's a great addition to your pedalboard, giving you the ability to expand the processing power of your rig, whether or not you have an HX device or Pod Go already.

Expand your effects with HX One

Last seen at $300