Browse Helix Models and Effects
Voltage (Line 6 Original)
Released With Helix Version 3.70
The Line 6 Voltage is an original amp design from the Line 6 series of Catalyst amps. Voltage was inspired by the Victoria Electro-King amp, a 15 watt amp with a warm, clean sound and a dynamic overdrive tone. The Electro-King is itself inspired by the 1957 Gibson GA-40 amplifier.
Like all of the amps from the Catalyst range, Voltage contains a boost that can be assigned to a footswitch in your preset.
RHCP - Throw Away Your TV
Check it out!!!. This has 5 snapshots preset:SlapbackPhaserSlapback + PhaserSustain + SlapbackOBI wah Sample hold
Youtube- 👇 Downloads: 119
- 🤘 Upvotes: 1
- Member: Helixman
- Device:
Helix Native - Performance Type:
Direct (Recording, Headphone, PA)
Dig In
Cool classic rock patch that can play the slightly dirty cleans to fuller overdrive based on how hard you hit the strings. Very touch sensitive.
Soundcloud- 👇 Downloads: 206
- 🤘 Upvotes: 0
- Member: Jorge
- Device:
HX Stomp - Performance Type:
Direct (Recording, Headphone, PA)
| Patch | Device | Performance Type |
Description | Member | 👇 Downloads | 🤘 Upvotes |
|---|---|---|---|---|---|---|
|
RHCP - Throw Away Your TV
Youtube |
Helix Native | Direct (Recording, Headphone, PA) | Check it out!!!. This has 5 snapshots preset:SlapbackPhaserSlapback + PhaserSustain + SlapbackOBI wah Sample hold | Helixman | 119 | 1 |
|
Dig In
Soundcloud |
HX Stomp | Direct (Recording, Headphone, PA) | Cool classic rock patch that can play the slightly dirty cleans to fuller overdrive based on how hard you hit the strings. Very touch sensitive. | Jorge | 206 | 0 |
Comments
There are no comments for this yet.
Some Products That We Love
Brought to you by the Fluid Solo department of CommercePower your HX Stomp via USB
This handy cord allows you to power your HX Stomp from a USB port, so you can power it from a USB power bank or other power source.
Last seen around $23
Put Some Pedal Toppers On!
Pedal toppers make switching easier by giving you more surface area for your feet.
Last seen around $9 for a ten-pack
Add some Footswitches to your Rig
A simple and cost effective way to add 2 additional footswitches to your HX Stomp or other HX device. Yes, including Pod Go! Please be advised that you will also need a TRS type 1/4 inch cable to use both switches.
Last seen around $22