Browse Helix Models and Effects
Helix currently supports 111 amplifier models, 276 effects, 56 speaker cab models, and 16 microphones. On top of all that you also have the ability to load Impulse Responses (IRs) that you can grab from free or paid sources. Go have fun.
8x10 SV Beast (8x10" Ampeg SVT)
Truly a beast of a bass cabinet, this refrigerator-sized unit is not meant to be lugged up and down the stairs at your local club. But it sounds so good, it's an industry standard for a reason.
Black Rusty Bass Tone
This tone is modeled on the bass guitar chain of Rusty Sanchez, bassist for Black Monday. It's a straight ahead rock and roll bass tone of a SansAmp into an SVT.
Soundcloud- 👇 Downloads: 905
- 🤘 Upvotes: 7
- Member: Jorge
- Performance Type:
Direct (Recording, Headphone, PA)
GrindBass
This is a fun bass patch. With 3 snaps. Snap 1 is EQed with chorus. Snap2 is is Grimey little crunchy and fat. Snap 3 is balls to the wall all in. Loud crunchy and fat. edit it, delete it, hate it all for your jamming pleasure. Email me if you want kd0ytb at hotmail dot com
- 👇 Downloads: 548
- 🤘 Upvotes: 4
- Member: N0rsn
- Performance Type:
Direct (Recording, Headphone, PA)
| Patch | Performance Type |
Description | Member | 👇 Downloads | 🤘 Upvotes |
|---|---|---|---|---|---|
|
Black Rusty Bass Tone
Soundcloud |
Direct (Recording, Headphone, PA) | This tone is modeled on the bass guitar chain of Rusty Sanchez, bassist for Black Monday. It's a straight ahead rock and roll bass tone of a SansAmp into an SVT. | Jorge | 905 | 7 |
| GrindBass | Direct (Recording, Headphone, PA) | This is a fun bass patch. With 3 snaps. Snap 1 is EQed with chorus. Snap2 is is Grimey little crunchy and fat. Snap 3 is balls to the wall all in. Loud crunchy and fat. edit it, delete it, hate it all for your jamming pleasure. Email me if you want kd0ytb at hotmail dot com | N0rsn | 548 | 4 |
Comments
There are no comments for this yet.
Some Products That We Love
Brought to you by the Fluid Solo department of CommercePower your HX Stomp via USB
This handy cord allows you to power your HX Stomp from a USB port, so you can power it from a USB power bank or other power source.
Last seen around $23
Extra Power Cable for your HX Stomp
I've been using one of these power supplies permanently zip-tied to my pedalboard, and it's been very handy to keep the original power supply around for off-board usage. Plus it's cheap and works well.
Last seen around $16
Add some Footswitches to your Rig
A simple and cost effective way to add 2 additional footswitches to your HX Stomp or other HX device. Yes, including Pod Go! Please be advised that you will also need a TRS type 1/4 inch cable to use both switches.
Last seen around $22