Browse Helix Models and Effects
Helix currently supports 72 amplifier models, 194 effects, 37 speaker cab models, and 16 microphones. On top of all that you also have the ability to load Impulse Responses (IRs) that you can grab from free or paid sources. Go have fun.
Bucket Brigade (BOSS® DM-2)
Recorded using a Les Paul and a variation of the "Appetite 1/2 Step" patch available here on this site.
This is the remastered Helix model of the Boss DM-2 delay pedal. It has a great old school analog tone.
View the Boss DM-2 product page on Amazon.
JOHNAMAYERTRIX
(Reposted with permission from AndrewUtz on CustomTone.com) A John Mayer Tone, referencing Slow Dancing In A Burning Room. In this patch I used some basic stuff that I know John has used (or the closest thing to it I could find). I know live he has used dumbles along with a fender bandmaster, so for this I used a split path and ran a Litigator and a Twin Reverb at the same time. As far as the cabs go I tried my best to match how I know that continuum was recorded, I typically use red wire IR's but for you guys I used the equivalent Helix cabs. I put a dual cab block of the same cab but one is mic'd with a 57 and the other a beyerdynamic 160 (he really used an M88). Looks like he also used U87 or 67 room mics but alas it wouldn't let me add in another cab block. To compensate for this I used a room reverb at the end of the chain. I also put the Spring reverb before the cabs to simulate the acutal outboard fender reverb tanks john has used in the past. This patch probably needs some tweaking to make it like whatever you like, but I definitely think this is a good starting point for a Mayer like tone.
- 👇 Downloads: 453
- 🤘 Upvotes: 3
- Member: Jorge
- Performance Type:
Direct (Recording, Headphone, PA)
Slapback Billy
Nice rockabilly tone with slapback delay.
- 👇 Downloads: 43
- 🤘 Upvotes: 2
- Member: Jorge
- Performance Type:
Direct (Recording, Headphone, PA)
Grammatico Brt
This is the default patch for the Grammatico Brt model from the stock presets of the Helix 2.8 update. This may be useful to you if you didn't overwrite the presets on your device.You must be running 2.8 Firmware, or the 1.8 firmware on Helix Native.
- 👇 Downloads: 91
- 🤘 Upvotes: 0
- Member: Jorge
- Performance Type:
Direct (Recording, Headphone, PA)
| Patch | Performance Type |
Description | Member | 👇 Downloads | 🤘 Upvotes |
|---|---|---|---|---|---|
| JOHNAMAYERTRIX | Direct (Recording, Headphone, PA) | (Reposted with permission from AndrewUtz on CustomTone.com) A John Mayer Tone, referencing Slow Dancing In A Burning Room. In this patch I used some basic stuff that I know John has used (or the closest thing to it I could find). I know live he has used dumbles along with a fender bandmaster,… | Jorge | 453 | 3 |
| Slapback Billy | Direct (Recording, Headphone, PA) | Nice rockabilly tone with slapback delay. | Jorge | 43 | 2 |
| Grammatico Brt | Direct (Recording, Headphone, PA) | This is the default patch for the Grammatico Brt model from the stock presets of the Helix 2.8 update. This may be useful to you if you didn't overwrite the presets on your device.You must be running 2.8 Firmware, or the 1.8 firmware on Helix Native. | Jorge | 91 | 0 |
Comments
There are no comments for this yet.
Some Products That We Love
Brought to you by the Fluid Solo department of CommerceUse a Mic with your HX Stomp
The HX Stomp and Helix LT don't have a mic input like the Helix Floor, but this adapter allows you to plug your Mic into the Aux Return as set up guitar/vocal patches such as this one.
Last seen around $19
Add some Footswitches to your Rig
A simple and cost effective way to add 2 additional footswitches to your HX Stomp or other HX device. Yes, including Pod Go! Please be advised that you will also need a TRS type 1/4 inch cable to use both switches.
Last seen around $22
Power your HX Stomp via USB
This handy cord allows you to power your HX Stomp from a USB port, so you can power it from a USB power bank or other power source.
Last seen around $23