Browse Helix Models and Effects
Helix currently supports 111 amplifier models, 276 effects, 56 speaker cab models, and 16 microphones. On top of all that you also have the ability to load Impulse Responses (IRs) that you can grab from free or paid sources. Go have fun.
Low/High Shelf (Line 6 Original)
Released With Helix Version 2.80
Low-shelf/high-shelf EQ (equalization) is good for enhancing or reducing high or low frequencies in your recording’s mix, such as adding a sense of presence to cymbals (add a few dBs at 10 kHz). In the context of EQ, shelf means that the EQ effects are on the frequencies above (high shelf) or below (low shelf) your setting (called the corner frequency).
Description source: dummies.com
De Javu
Inspired by Olivia Rodrigo's "de javu", I created this HX stomp patch. Featuring two different distortion pedals switched by FS1, and an auto filter effect on FS2, this is an analog signal path ending in a dual stereo delay (trying to recreate the riff at the end of the chorus). Signal path is below, enjoy!Deluxe Comp -> Minotaur -> Ratatouille -> Autofilter -> Bubble Vibrato -> Tweed Blues -> Dual Delay -> Low/High Shelf
- 👇 Downloads: 256
- 🤘 Upvotes: 4
- Member: Danemiles
- Performance Type:
Direct (Recording, Headphone, PA)
Jason Sadites BE100
This is the imitation of Jason Sadites' BE100 / Placater amp patch, as featured in the Youtube video below.
Youtube- 👇 Downloads: 419
- 🤘 Upvotes: 3
- Member: Danemiles
- Performance Type:
Direct (Recording, Headphone, PA)
Jason Sadites Bogner
Amp and cab setup of the German Mahadeva / Bogner, as featured on Jason Sadites' Youtube.
Youtube- 👇 Downloads: 482
- 🤘 Upvotes: 3
- Member: Danemiles
- Performance Type:
Direct (Recording, Headphone, PA)
Jason Sadites Dr. Z66
As featured on Jason Sadites' Youtube channel (link below), here is a patch of the Interstate Zed amp and cab.
Youtube- 👇 Downloads: 357
- 🤘 Upvotes: 2
- Member: Danemiles
- Performance Type:
Direct (Recording, Headphone, PA)
Jason Sadites DOOM
An amp and cab setup based on the Line 6 Doom as featured in Jason Sadites' Youtube channel.
Youtube- 👇 Downloads: 311
- 🤘 Upvotes: 2
- Member: Danemiles
- Performance Type:
Direct (Recording, Headphone, PA)
Jason Sadites Matchless
Amp and cab setup of the Match Ch2, as seen on Jason Sadites' Youtube channel.
Youtube- 👇 Downloads: 399
- 🤘 Upvotes: 2
- Member: Danemiles
- Performance Type:
Direct (Recording, Headphone, PA)
Brothers Osborne - Stay A Little Longer
This patch is inspired by the tone of The Brothers Osborne's "Stay A Little Longer." The preset is based on the Silvertone 1484 (aka Mail Order Twin), a documented feature of the John Osborne live rig. I also recommend trying this out with a Fender DRRI (US Deluxe Nrm), as this is a slightly cleaner take on the tone.
- 👇 Downloads: 267
- 🤘 Upvotes: 2
- Member: Danemiles
- Performance Type:
Direct (Recording, Headphone, PA)
Hard Rock
HardRock sound.3 Snapshot: 1 RHY, 2 CLEAN (with Chorus), 3 Lead
- 👇 Downloads: 13
- 🤘 Upvotes: 0
- Member: Ashesdarkend
- Performance Type:
Direct (Recording, Headphone, PA)
80 MARSH
Based on JCM 800 22034 Snapshot. The "+" snapshot is the same sound of previous snapshot plus Chorus.You can have Clean sound by turn down volume pot and choose neck pickup.
- 👇 Downloads: 15
- 🤘 Upvotes: 0
- Member: Ashesdarkend
- Performance Type:
Direct (Recording, Headphone, PA)
| Patch | Performance Type |
Description | Member | 👇 Downloads | 🤘 Upvotes |
|---|---|---|---|---|---|
| De Javu | Direct (Recording, Headphone, PA) | Inspired by Olivia Rodrigo's "de javu", I created this HX stomp patch. Featuring two different distortion pedals switched by FS1, and an auto filter effect on FS2, this is an analog signal path ending in a dual stereo delay (trying to recreate the riff at the end of the chorus). Signal path is belo… | Danemiles | 256 | 4 |
|
Jason Sadites BE100
Youtube |
Direct (Recording, Headphone, PA) | This is the imitation of Jason Sadites' BE100 / Placater amp patch, as featured in the Youtube video below. | Danemiles | 419 | 3 |
|
Jason Sadites Bogner
Youtube |
Direct (Recording, Headphone, PA) | Amp and cab setup of the German Mahadeva / Bogner, as featured on Jason Sadites' Youtube. | Danemiles | 482 | 3 |
|
Jason Sadites Dr. Z66
Youtube |
Direct (Recording, Headphone, PA) | As featured on Jason Sadites' Youtube channel (link below), here is a patch of the Interstate Zed amp and cab. | Danemiles | 357 | 2 |
|
Jason Sadites DOOM
Youtube |
Direct (Recording, Headphone, PA) | An amp and cab setup based on the Line 6 Doom as featured in Jason Sadites' Youtube channel. | Danemiles | 311 | 2 |
|
Jason Sadites Matchless
Youtube |
Direct (Recording, Headphone, PA) | Amp and cab setup of the Match Ch2, as seen on Jason Sadites' Youtube channel. | Danemiles | 399 | 2 |
| Brothers Osborne - Stay A Little Longer | Direct (Recording, Headphone, PA) | This patch is inspired by the tone of The Brothers Osborne's "Stay A Little Longer." The preset is based on the Silvertone 1484 (aka Mail Order Twin), a documented feature of the John Osborne live rig. I also recommend trying this out with a Fender DRRI (US Deluxe Nrm), as this is a slightly cleane… | Danemiles | 267 | 2 |
| Hard Rock | Direct (Recording, Headphone, PA) | HardRock sound.3 Snapshot: 1 RHY, 2 CLEAN (with Chorus), 3 Lead | Ashesdarkend | 13 | 0 |
| 80 MARSH | Direct (Recording, Headphone, PA) | Based on JCM 800 22034 Snapshot. The "+" snapshot is the same sound of previous snapshot plus Chorus.You can have Clean sound by turn down volume pot and choose neck pickup. | Ashesdarkend | 15 | 0 |
Comments
There are no comments for this yet.
Some Products That We Love
Brought to you by the Fluid Solo department of CommerceUse a Mic with your HX Stomp
The HX Stomp and Helix LT don't have a mic input like the Helix Floor, but this adapter allows you to plug your Mic into the Aux Return as set up guitar/vocal patches such as this one.
Last seen around $19
Power your HX Stomp via USB
This handy cord allows you to power your HX Stomp from a USB port, so you can power it from a USB power bank or other power source.
Last seen around $23
Extra Power Cable for your HX Stomp
I've been using one of these power supplies permanently zip-tied to my pedalboard, and it's been very handy to keep the original power supply around for off-board usage. Plus it's cheap and works well.
Last seen around $16