Browse Helix Models and Effects

Helix currently supports 111 amplifier models, 276 effects, 56 speaker cab models, and 16 microphones. On top of all that you also have the ability to load Impulse Responses (IRs) that you can grab from free or paid sources. Go have fun.

Optical Trem (Fender® optical tremolo circuit)

Optical Trem, the Helix model of a Fender® optical tremolo circuit

This is the remastered Helix model of the optical tremolo circuit used in blackface Fender amps like the Twin Reverb and Deluxe Reverb.


Bonamassa Live

This is a modified version of bart2580's "Bonamassa 1959LP" patch on customtone. I modified it to use a built-in cab rather an an IR, and made a few smaller tweaks as well. The delay is very present in the mix, so you my want to tame it a bit, I like it.

Soundcloud
  • 👇 Downloads: 474
  • 🤘 Upvotes: 4
  • Member: Jorge
  • Performance Type:
    Direct (Recording, Headphone, PA)


Jif Pedal Steel

This is a preset for Pedal Steel Guitar I created copying settings from a previous patch I put together using other hardware before purchasing a HX Stomp XL. I previously used 6 EQ channels on a 12 channel parametric EQ, in the HX patch I replicated the settings using 2 parametric blocks. The path in the HX is - Parametric - Parametric - Optical Trem - Jazz Rivet 120 - Celestion Vintage 30 IR - Multihead Delay - Ganymede Reverb. The Celestion Vintage 30 IR is a free download taster from Celestion and is available here - https://www.celestionplus.com/free-download/ I initially created this preset using a Strymon Bluesky Reverb, set up with a room reverb with modulation and connected into the Stomp using a FX send/return block, I have duplicated this as far as possible using the Ganymede Reverb in the HX, it sounds a bit different to the BlueSky, but it has it's own magic. I'll use this mainly in Ambient style recordings but it works well with other styles.

  • 👇 Downloads: 145
  • 🤘 Upvotes: 1
  • Member: Jiffie
  • Performance Type:
    Direct (Recording, Headphone, PA)


Rock Pedalboard

Cool rock pedalboard setup that I run straight into the clean channel of a  Mesa Mini Rectifier.

  • 👇 Downloads: 123
  • 🤘 Upvotes: 1
  • Member: Jorge
  • Performance Type:
    Plugged in Front of the Amp


Hotel Califfo

My first idea about Hotel California

  • 👇 Downloads: 110
  • 🤘 Upvotes: 0
  • Member: Gianni
  • Performance Type:
    Direct (Recording, Headphone, PA)


Patch Performance
Type
Description Member 👇 Downloads 🤘 Upvotes
Bonamassa Live
Soundcloud
Direct (Recording, Headphone, PA) This is a modified version of bart2580's "Bonamassa 1959LP" patch on customtone. I modified it to use a built-in cab rather an an IR, and made a few smaller tweaks as well. The delay is very present in the mix, so you my want to tame it a bit, I like it. Jorge 474 4
Jif Pedal Steel Direct (Recording, Headphone, PA) This is a preset for Pedal Steel Guitar I created copying settings from a previous patch I put together using other hardware before purchasing a HX Stomp XL. I previously used 6 EQ channels on a 12 channel parametric EQ, in the HX patch I replicated the settings using 2 parametric blocks. The path … Jiffie 145 1
Rock Pedalboard Plugged in Front of the Amp Cool rock pedalboard setup that I run straight into the clean channel of a  Mesa Mini Rectifier. Jorge 123 1
Hotel Califfo Direct (Recording, Headphone, PA) My first idea about Hotel California Gianni 110 0
Comments    

There are no comments for this yet.

Some Products That We Love

Brought to you by the Fluid Solo department of Commerce

Extra Power Cable for your HX Stomp

I've been using one of these power supplies permanently zip-tied to my pedalboard, and it's been very handy to keep the original power supply around for off-board usage. Plus it's cheap and works well.

Extra Power Cable for your HX Stomp

Last seen around $16

Rechargeable FRFR Amp For Your Modeler

The new Headrush FRFR Go is a cool solution to take your modeler tones on the go for practice use.

Rechargeable FRFR Amp For Your Modeler

Last seen at $150

Add some Footswitches to your Rig

A simple and cost effective way to add 2 additional footswitches to your HX Stomp or other HX device. Yes, including Pod Go! Please be advised that you will also need a TRS type 1/4 inch cable to use both switches.

Add some Footswitches to your Rig

Last seen around $22