Browse Helix Models and Effects

Helix currently supports 111 amplifier models, 276 effects, 56 speaker cab models, and 16 microphones. On top of all that you also have the ability to load Impulse Responses (IRs) that you can grab from free or paid sources. Go have fun.

Dynamic Hall (Line 6 Original)

Released With Helix Version 3.10
Dynamic Hall, the Helix model of a Line 6 Original

Sound sample recorded with a Les Paul into the Revv Purple amp model, default amp and cab settings. The reverb was added at the end of the signal chain.

A new hall reverb for the Helix 3.1 release. This is a full and lush rounding reverb.


Rockerverb

New for Helix 3.1, the Rockerveb is a very cool and versatile amp for rock n roll. Try this tone in place of a Marshall for a crunchier, fatter tone.

Youtube
  • πŸ‘‡ Downloads: 1171
  • 🀘 Upvotes: 11
  • Member: Jorge
  • Performance Type:
    Direct (Recording, Headphone, PA)


Heavy Metal (Takin' a Ride) by Don Felder

This patch generates the beginning keyboard sound by using three 3-Note Generators, delay, overdrive and chorus as well as the verse delay using a momentary stomp footswitch. There are a couple ways to start the song. Check out the video at the bottom of this page.Here's how I do it.Start the Organ stomp (wait at least 10 seconds for minimum Attack time). You can change the Attack time of each 3-Note Generator for quicker intro.Have the drummer do a four beat count in. On 4, turn off the Organ (the delay will keep it ringing for another beat)Immediately step on the Verse Delay and on 1 of the next bar play the D->E chords and one chug on the open E chord.Release the Verse Delay (it will trail) and keep chugging.Repeat steps 4-5 for each bar.I put a 1-Switch Looper at the end  so you can record the main riff to solo over. If you do use it, I recommend using the Solo Dly for the first D->E so you have time to hit the looper, turn off the Solo Dly (it will trail) then use the Verse Delay for the rest of the rhythm.It uses the same Fulltone OCD and Deluxe Reverb as Felders rig rundown on YouTube. Enjoy.

Youtube
  • πŸ‘‡ Downloads: 145
  • 🀘 Upvotes: 2
  • Member: Kickinstuff
  • Performance Type:
    Direct (Recording, Headphone, PA)


Lap Steel

Cool lap steel tone for country western or Hawaiian music. Sorry about the single coil hum in the demo, had trouble getting rid of it completely, even with the Horizon gate engaged.

Soundcloud
  • πŸ‘‡ Downloads: 323
  • 🀘 Upvotes: 2
  • Member: Jorge
  • Performance Type:
    Direct (Recording, Headphone, PA)


5150 Crunch Lead Wah

Super fun 5150 patch... not for chugging but is a great hard rock patch. It has 3 snapshots... 1. Rhythm 2. Lead 3. Lead with auto wah. This was made with my PowerCab Plus using a York Audio IR so you will need to keep that in mind. Enjoy!!!

  • πŸ‘‡ Downloads: 651
  • 🀘 Upvotes: 1
  • Member: Mystixboi
  • Performance Type:
    Line 6 Powercab


Mayer with Boost and Mood

Here's a clean preset I made with 3 snapshots: 1. Mayer type clean 2. Clean with boost 3. Ambient Clean I used my PC+ so you will need to use an IR. Enjoy!

  • πŸ‘‡ Downloads: 871
  • 🀘 Upvotes: 1
  • Member: Mystixboi
  • Performance Type:
    Line 6 Powercab


Jingle Jangle

12 string into a chime amp = awesome. The Soundcloud demo below was made with Logic drums, and I used my "Guitar Goes Bass" preset available here on fluid solo to create the bass guitar sound. No bass guitar needed. Listen for the organ-like fadeout, very cool.

Soundcloud
  • πŸ‘‡ Downloads: 113
  • 🀘 Upvotes: 1
  • Member: Jorge
  • Performance Type:
    Direct (Recording, Headphone, PA)


Amp Switcher with Effects

This patch allows you to send a channel switch command to your amp via the HX Effect's built in capabilities for channel switching, while at the same time toggling effects on and off with the 2 snapshots. On my personal setting, the "soft" snapshot is still dirty by using the Klon model, but the "hard" snapshot is using  my amp's gain.There is no 4 cable method used here, it's just the HX Effects switching my amp channels for me, and toggling some effects.NOTE: to use this patch, you will need to set the Pedal 2 Jack setting to "Amp2" in the device settings of the HX effects.

  • πŸ‘‡ Downloads: 75
  • 🀘 Upvotes: 1
  • Member: Jorge
  • Performance Type:
    Plugged in Front of the Amp


Rock Pedalboard

Cool rock pedalboard setup that I run straight into the clean channel of a  Mesa Mini Rectifier.

  • πŸ‘‡ Downloads: 109
  • 🀘 Upvotes: 1
  • Member: Jorge
  • Performance Type:
    Plugged in Front of the Amp


  • πŸ‘‡ Downloads: 30
  • 🀘 Upvotes: 0
  • Member: Jofjdn
  • Performance Type:
    Direct (Recording, Headphone, PA)


Amber 311

311 - Amber

  • πŸ‘‡ Downloads: 21
  • 🀘 Upvotes: 0
  • Member: Brisimmons105
  • Performance Type:
    Direct (Recording, Headphone, PA)


Patch Performance
Type
Description Member πŸ‘‡ Downloads 🀘 Upvotes
Rockerverb
Youtube
Direct (Recording, Headphone, PA) New for Helix 3.1, the Rockerveb is a very cool and versatile amp for rock n roll. Try this tone in place of a Marshall for a crunchier, fatter tone. Jorge 1171 11
Heavy Metal (Takin' a Ride) by Don Felder
Youtube
Direct (Recording, Headphone, PA) This patch generates the beginning keyboard sound by using three 3-Note Generators, delay, overdrive and chorus as well as the verse delay using a momentary stomp footswitch. There are a couple ways to start the song. Check out the video at the bottom of this page.Here's how I do it.Start the Organ… Kickinstuff 145 2
Lap Steel
Soundcloud
Direct (Recording, Headphone, PA) Cool lap steel tone for country western or Hawaiian music. Sorry about the single coil hum in the demo, had trouble getting rid of it completely, even with the Horizon gate engaged. Jorge 323 2
5150 Crunch Lead Wah Line 6 Powercab Super fun 5150 patch... not for chugging but is a great hard rock patch. It has 3 snapshots... 1. Rhythm 2. Lead 3. Lead with auto wah. This was made with my PowerCab Plus using a York Audio IR so you will need to keep that in mind. Enjoy!!! Mystixboi 651 1
Mayer with Boost and Mood Line 6 Powercab Here's a clean preset I made with 3 snapshots: 1. Mayer type clean 2. Clean with boost 3. Ambient Clean I used my PC+ so you will need to use an IR. Enjoy! Mystixboi 871 1
Jingle Jangle
Soundcloud
Direct (Recording, Headphone, PA) 12 string into a chime amp = awesome. The Soundcloud demo below was made with Logic drums, and I used my "Guitar Goes Bass" preset available here on fluid solo to create the bass guitar sound. No bass guitar needed. Listen for the organ-like fadeout, very cool. Jorge 113 1
Amp Switcher with Effects Plugged in Front of the Amp This patch allows you to send a channel switch command to your amp via the HX Effect's built in capabilities for channel switching, while at the same time toggling effects on and off with the 2 snapshots. On my personal setting, the "soft" snapshot is still dirty by using the Klon model, but the "h… Jorge 75 1
Rock Pedalboard Plugged in Front of the Amp Cool rock pedalboard setup that I run straight into the clean channel of a  Mesa Mini Rectifier. Jorge 109 1
Talisman Direct (Recording, Headphone, PA) d Jofjdn 30 0
Amber 311 Direct (Recording, Headphone, PA) 311 - Amber Brisimmons105 21 0
Comments    

There are no comments for this yet.

Some Products That We Love

Brought to you by the Fluid Solo department of Commerce

A Handy Rechargeable Tuner

Those snark-y headstock tuners are great, but it gets old changing out those coin-sized batteries. This rechargeable unit makes tuning a breeze.

A Handy Rechargeable Tuner

Last seen at $29

Rechargeable FRFR Amp For Your Modeler

The new Headrush FRFR Go is a cool solution to take your modeler tones on the go for practice use.

Rechargeable FRFR Amp For Your Modeler

Last seen at $150

Add some Footswitches to your Rig

A simple and cost effective way to add 2 additional footswitches to your HX Stomp or other HX device. Yes, including Pod Go! Please be advised that you will also need a TRS type 1/4 inch cable to use both switches.

Add some Footswitches to your Rig

Last seen around $22