Browse Helix Models and Effects

Helix currently supports 111 amplifier models, 276 effects, 56 speaker cab models, and 16 microphones. On top of all that you also have the ability to load Impulse Responses (IRs) that you can grab from free or paid sources. Go have fun.

LA Studio Comp (Teletronix® LA-2A®)

LA Studio Comp, the Helix model of a Teletronix® LA-2A®

For over 50 years the Teletronix LA-2A has been revered for its smooth, natural, musical compression. WIth its unique tube-driven electro-optical attenuator system that allows instantaneous gain reduction with no increase in harmonic distortion, the LA-2A massages signals like no other compressor ever made.

Description source: uaudio.com


Legacy Llama

Legendary Drive and The Alpaca Rouge into a HiWatt in stereo. Fat, loose OD sounds without getting flubby. Works well with humbuckers. You may have to boost the drive settings if using single coils.

  • 👇 Downloads: 186
  • 🤘 Upvotes: 2
  • Member: Rocco Crocco
  • Performance Type:
    Direct (Recording, Headphone, PA)


YA (Yet Another) Dumble

Second attemp at a Dumble-ish tone using the Zen Drive pedal into a Fender Deluxe Reverb.

  • 👇 Downloads: 453
  • 🤘 Upvotes: 2
  • Member: Jorge
  • Performance Type:
    Direct (Recording, Headphone, PA)


Killer Reverb

Member Goo Fighters of The Gear Page had this cool suggestion, so I tested it on a patch and liked it thru headphones.It's an interesting method of stacking reverbs to get different ambient effects.

  • 👇 Downloads: 546
  • 🤘 Upvotes: 2
  • Member: Jorge
  • Performance Type:
    Direct (Recording, Headphone, PA)


Jason Sadites Dr. Z66

As featured on Jason Sadites' Youtube channel (link below), here is a patch of the Interstate Zed amp and cab. 

Youtube
  • 👇 Downloads: 357
  • 🤘 Upvotes: 2
  • Member: Danemiles
  • Performance Type:
    Direct (Recording, Headphone, PA)


Jason Sadites DOOM

An amp and cab setup based on the Line 6 Doom as featured in Jason Sadites' Youtube channel.

Youtube
  • 👇 Downloads: 311
  • 🤘 Upvotes: 2
  • Member: Danemiles
  • Performance Type:
    Direct (Recording, Headphone, PA)


Jason Sadites Matchless

Amp and cab setup of the Match Ch2, as seen on Jason Sadites' Youtube channel. 

Youtube
  • 👇 Downloads: 399
  • 🤘 Upvotes: 2
  • Member: Danemiles
  • Performance Type:
    Direct (Recording, Headphone, PA)


Brothers Osborne - Stay A Little Longer

This patch is inspired by the tone of The Brothers Osborne's "Stay A Little Longer." The preset is based on the Silvertone 1484 (aka Mail Order Twin), a documented feature of the John Osborne live rig. I also recommend trying this out with a Fender DRRI (US Deluxe Nrm), as this is a slightly cleaner take on the tone. 

  • 👇 Downloads: 267
  • 🤘 Upvotes: 2
  • Member: Danemiles
  • Performance Type:
    Direct (Recording, Headphone, PA)


Heavy Metal (Takin' a Ride) by Don Felder

This patch generates the beginning keyboard sound by using three 3-Note Generators, delay, overdrive and chorus as well as the verse delay using a momentary stomp footswitch. There are a couple ways to start the song. Check out the video at the bottom of this page.Here's how I do it.Start the Organ stomp (wait at least 10 seconds for minimum Attack time). You can change the Attack time of each 3-Note Generator for quicker intro.Have the drummer do a four beat count in. On 4, turn off the Organ (the delay will keep it ringing for another beat)Immediately step on the Verse Delay and on 1 of the next bar play the D->E chords and one chug on the open E chord.Release the Verse Delay (it will trail) and keep chugging.Repeat steps 4-5 for each bar.I put a 1-Switch Looper at the end  so you can record the main riff to solo over. If you do use it, I recommend using the Solo Dly for the first D->E so you have time to hit the looper, turn off the Solo Dly (it will trail) then use the Verse Delay for the rest of the rhythm.It uses the same Fulltone OCD and Deluxe Reverb as Felders rig rundown on YouTube. Enjoy.

Youtube
  • 👇 Downloads: 146
  • 🤘 Upvotes: 2
  • Member: Kickinstuff
  • Performance Type:
    Direct (Recording, Headphone, PA)


Lap Steel

Cool lap steel tone for country western or Hawaiian music. Sorry about the single coil hum in the demo, had trouble getting rid of it completely, even with the Horizon gate engaged.

Soundcloud
  • 👇 Downloads: 334
  • 🤘 Upvotes: 2
  • Member: Jorge
  • Performance Type:
    Direct (Recording, Headphone, PA)


jimi Hx

Inspired by RJ ronquillo's video youtube.com - I created this HX stomp patch. I used an external boost pedal for my clean tones. I just roll off the guitar volume. I'll be posting a podcast episode soon where you can hear the patch in action!

Soundcloud
  • 👇 Downloads: 445
  • 🤘 Upvotes: 2
  • Member: Kalimar
  • Performance Type:
    Direct (Recording, Headphone, PA)


Patch Performance
Type
Description Member 👇 Downloads 🤘 Upvotes
Legacy Llama Direct (Recording, Headphone, PA) Legendary Drive and The Alpaca Rouge into a HiWatt in stereo. Fat, loose OD sounds without getting flubby. Works well with humbuckers. You may have to boost the drive settings if using single coils. Rocco Crocco 186 2
YA (Yet Another) Dumble Direct (Recording, Headphone, PA) Second attemp at a Dumble-ish tone using the Zen Drive pedal into a Fender Deluxe Reverb. Jorge 453 2
Killer Reverb Direct (Recording, Headphone, PA) Member Goo Fighters of The Gear Page had this cool suggestion, so I tested it on a patch and liked it thru headphones.It's an interesting method of stacking reverbs to get different ambient effects. Jorge 546 2
Jason Sadites Dr. Z66
Youtube
Direct (Recording, Headphone, PA) As featured on Jason Sadites' Youtube channel (link below), here is a patch of the Interstate Zed amp and cab.  Danemiles 357 2
Jason Sadites DOOM
Youtube
Direct (Recording, Headphone, PA) An amp and cab setup based on the Line 6 Doom as featured in Jason Sadites' Youtube channel. Danemiles 311 2
Jason Sadites Matchless
Youtube
Direct (Recording, Headphone, PA) Amp and cab setup of the Match Ch2, as seen on Jason Sadites' Youtube channel.  Danemiles 399 2
Brothers Osborne - Stay A Little Longer Direct (Recording, Headphone, PA) This patch is inspired by the tone of The Brothers Osborne's "Stay A Little Longer." The preset is based on the Silvertone 1484 (aka Mail Order Twin), a documented feature of the John Osborne live rig. I also recommend trying this out with a Fender DRRI (US Deluxe Nrm), as this is a slightly cleane… Danemiles 267 2
Heavy Metal (Takin' a Ride) by Don Felder
Youtube
Direct (Recording, Headphone, PA) This patch generates the beginning keyboard sound by using three 3-Note Generators, delay, overdrive and chorus as well as the verse delay using a momentary stomp footswitch. There are a couple ways to start the song. Check out the video at the bottom of this page.Here's how I do it.Start the Organ… Kickinstuff 146 2
Lap Steel
Soundcloud
Direct (Recording, Headphone, PA) Cool lap steel tone for country western or Hawaiian music. Sorry about the single coil hum in the demo, had trouble getting rid of it completely, even with the Horizon gate engaged. Jorge 334 2
jimi Hx
Soundcloud
Direct (Recording, Headphone, PA) Inspired by RJ ronquillo's video youtube.com - I created this HX stomp patch. I used an external boost pedal for my clean tones. I just roll off the guitar volume. I'll be posting a podcast episode soon where you can hear the patch in action! Kalimar 445 2
Comments    

There are no comments for this yet.

Some Products That We Love

Brought to you by the Fluid Solo department of Commerce

Rechargeable FRFR Amp For Your Modeler

The new Headrush FRFR Go is a cool solution to take your modeler tones on the go for practice use.

Rechargeable FRFR Amp For Your Modeler

Last seen at $150

Add some Footswitches to your Rig

A simple and cost effective way to add 2 additional footswitches to your HX Stomp or other HX device. Yes, including Pod Go! Please be advised that you will also need a TRS type 1/4 inch cable to use both switches.

Add some Footswitches to your Rig

Last seen around $22

Extra Power Cable for your HX Stomp

I've been using one of these power supplies permanently zip-tied to my pedalboard, and it's been very handy to keep the original power supply around for off-board usage. Plus it's cheap and works well.

Extra Power Cable for your HX Stomp

Last seen around $16