Browse Helix Models and Effects

Helix currently supports 111 amplifier models, 276 effects, 56 speaker cab models, and 16 microphones. On top of all that you also have the ability to load Impulse Responses (IRs) that you can grab from free or paid sources. Go have fun.

Mono FX Loop (Mono FX Loop)

A mono FX Loop activates the effects loop within the Helix device to enable the use of additional effects devices. This effect is using only mono input and output.


Phil X Pod Go

This patch is based off of the information on this post on The Gear Page. It's a simple Placater dirty amp into a delay. The amp settings are identical to those in the discussion, and instead of an IR, this version uses a stock cab. Adjust to taste, as always.

  • πŸ‘‡ Downloads: 523
  • 🀘 Upvotes: 1
  • Member: Jorge
  • Performance Type:
    Direct (Recording, Headphone, PA)


Phil X Pod Go IR

This patch is based off of the information on this post on The Gear Page. It's a simple Placater dirty amp into a delay. The amp settings are identical to those in the discussion, and uses the same IR as was discussed in the post.The IR can be downloaded for free from here:dropbox.com

  • πŸ‘‡ Downloads: 430
  • 🀘 Upvotes: 1
  • Member: Jorge
  • Performance Type:
    Direct (Recording, Headphone, PA)


Boys dont cry H

Song: Boys don't cryArtist: The CureTwo snapshots: 1. Clean. 2. Lead (for the melody). 3. and 4. Not used. I used the jazz chorus 120 and one ownhammer IR OH 112 DLXVRB C12R OH2-M+. If you can't get the ownhammer IR, the patch still working with the 2x12 Jazz Rivet cabinet included in the POD Go. Let me know if useful thru the rating section. Hernan

  • πŸ‘‡ Downloads: 363
  • 🀘 Upvotes: 1
  • Member: Hernan93
  • Performance Type:
    Direct (Recording, Headphone, PA)


Mars Hall

JCM 800 Marshall Tone. A little extra crunch available using the OCD pedal.

  • πŸ‘‡ Downloads: 719
  • 🀘 Upvotes: 0
  • Member: Jorge
  • Performance Type:
    Direct (Recording, Headphone, PA)


Psychotropic Eco

Very dynamic, moody, endless possibilities, builds the lows, nicely ambient shimmer   **Check it with the headphones on!  Let me know what you think: jander1@rogers.com  

  • πŸ‘‡ Downloads: 372
  • 🀘 Upvotes: 0
  • Member: Injun33
  • Performance Type:
    Direct (Recording, Headphone, PA)


ALLAN AMP

drivers,cleans

  • πŸ‘‡ Downloads: 68
  • 🀘 Upvotes: 0
  • Member: Juliobrau
  • Performance Type:
    Direct (Recording, Headphone, PA)


Amber 311

311 - Amber

  • πŸ‘‡ Downloads: 37
  • 🀘 Upvotes: 0
  • Member: Brisimmons105
  • Performance Type:
    Direct (Recording, Headphone, PA)


Marshall 2203

The Mighty JCM 800 2203 100 Watt, now available for Pod Go.

  • πŸ‘‡ Downloads: 62
  • 🀘 Upvotes: 0
  • Member: Jorge
  • Performance Type:
    Direct (Recording, Headphone, PA)


Metallica Black

But wait, it's the wrong amp! Yes, but it sounds right. Play with the EQ block to adjust to your taste, this sounded slightly brighter than the album tone but I liked it that way. Good for Metallica's Black Album tones, which are of course layered amps in the album. I used a Gibson explorer with stock pickups to create the preset.

  • πŸ‘‡ Downloads: 58
  • 🀘 Upvotes: 0
  • Member: Jorge
  • Performance Type:
    Direct (Recording, Headphone, PA)


Smash Pumpkin

A recreation of the big muff + marshall JCM800 smashing punpkins tone, inspired by this video of billy corgan describing how they found their sound.Humbuckers recommended.Uses the Brit 2203 model from the Pod GO 2.5 update.

Youtube
  • πŸ‘‡ Downloads: 45
  • 🀘 Upvotes: 0
  • Member: Uriziv17
  • Performance Type:
    Direct (Recording, Headphone, PA)


Patch Performance
Type
Description Member πŸ‘‡ Downloads 🀘 Upvotes
Phil X Pod Go Direct (Recording, Headphone, PA) This patch is based off of the information on this post on The Gear Page. It's a simple Placater dirty amp into a delay. The amp settings are identical to those in the discussion, and instead of an IR, this version uses a stock cab. Adjust to taste, as always. Jorge 523 1
Phil X Pod Go IR Direct (Recording, Headphone, PA) This patch is based off of the information on this post on The Gear Page. It's a simple Placater dirty amp into a delay. The amp settings are identical to those in the discussion, and uses the same IR as was discussed in the post.The IR can be downloaded for free from here:dropbox.com Jorge 430 1
Boys dont cry H Direct (Recording, Headphone, PA) Song: Boys don't cryArtist: The CureTwo snapshots: 1. Clean. 2. Lead (for the melody). 3. and 4. Not used. I used the jazz chorus 120 and one ownhammer IR OH 112 DLXVRB C12R OH2-M+. If you can't get the ownhammer IR, the patch still working with the 2x12 Jazz Rivet cabinet included in the POD Go. L… Hernan93 363 1
Mars Hall Direct (Recording, Headphone, PA) JCM 800 Marshall Tone. A little extra crunch available using the OCD pedal. Jorge 719 0
Psychotropic Eco Direct (Recording, Headphone, PA) Very dynamic, moody, endless possibilities, builds the lows, nicely ambient shimmer   **Check it with the headphones on!  Let me know what you think: jander1@rogers.com   Injun33 372 0
ALLAN AMP Direct (Recording, Headphone, PA) drivers,cleans Juliobrau 68 0
Amber 311 Direct (Recording, Headphone, PA) 311 - Amber Brisimmons105 37 0
Marshall 2203 Direct (Recording, Headphone, PA) The Mighty JCM 800 2203 100 Watt, now available for Pod Go. Jorge 62 0
Metallica Black Direct (Recording, Headphone, PA) But wait, it's the wrong amp! Yes, but it sounds right. Play with the EQ block to adjust to your taste, this sounded slightly brighter than the album tone but I liked it that way. Good for Metallica's Black Album tones, which are of course layered amps in the album. I used a Gibson explorer with st… Jorge 58 0
Smash Pumpkin
Youtube
Direct (Recording, Headphone, PA) A recreation of the big muff + marshall JCM800 smashing punpkins tone, inspired by this video of billy corgan describing how they found their sound.Humbuckers recommended.Uses the Brit 2203 model from the Pod GO 2.5 update. Uriziv17 45 0
Comments    

There are no comments for this yet.

Some Products That We Love

Brought to you by the Fluid Solo department of Commerce

Add some Footswitches to your Rig

A simple and cost effective way to add 2 additional footswitches to your HX Stomp or other HX device. Yes, including Pod Go! Please be advised that you will also need a TRS type 1/4 inch cable to use both switches.

Add some Footswitches to your Rig

Last seen around $22

Use a Mic with your HX Stomp

The HX Stomp and Helix LT don't have a mic input like the Helix Floor, but this adapter allows you to plug your Mic into the Aux Return as set up guitar/vocal patches such as this one.

Use a Mic with your HX Stomp

Last seen around $19

Pocket NAM Multi-Effects Player

The Sonicake Pocket Master can play NAM captures, and is available for a ridiculous low price. A great way to test the waters with NAM amp captures.

Pocket NAM Multi-Effects Player

Last seen for about $65