Welcome!
You are using Fluid Solo in guest mode, which means you are free to browse patches and Proxy™ Clones, - but you will need an account in order to download our free downloads. Signing up is easy and free - it only takes a minute. We do not spam you or sell your information.
Fluid Solo supports all models of the Line 6 Helix family, including Helix Stadium, HX Effects, HX Stomp, and Pod Go. For more information, head on over to the FAQ.
Sign up for an account now Log in if you're already a memberYour Device
5150 Crunch Lead Wah
Super fun 5150 patch... not for chugging but is a great hard rock patch. It has 3 snapshots... 1. Rhythm 2. Lead 3. Lead with auto wah. This was made with my PowerCab Plus using a York Audio IR so you will need to keep that in mind. Enjoy!!!
- 👇 Downloads: 792
- 🤘 Upvotes: 1
- Member: Mystixboi
- Device:
HX Stomp - Performance Type:
Line 6 Powercab
RHCP - Throw Away Your TV
Check it out!!!. This has 5 snapshots preset:SlapbackPhaserSlapback + PhaserSustain + SlapbackOBI wah Sample hold
Youtube- 👇 Downloads: 108
- 🤘 Upvotes: 1
- Member: Helixman
- Device:
Helix Native - Performance Type:
Direct (Recording, Headphone, PA)
Silence
This utility patch is intended to reduce the hum and hiss of your noisy high gain amp. It is composed of 2 noise gates, one for your guitar and another for the amp's FX loop. The patch needs to run in the "4 Cable Method" to work properly. I use this patch to tame the hiss on my Mesa Boogie Mini Rectifier. It's a great amp but has a bit of hiss due to the high gain nature of the amp. By putting a noise gate in your amp's effects loop, you are mostly getting rid of any annoying hiss or hum that is in the amp's preamp section.
- 👇 Downloads: 239
- 🤘 Upvotes: 1
- Member: Jorge
- Device:
HX Stomp - Performance Type:
4 Cable Method
Epic Gain for Boss Katana 50
Use this patch by plugging straight into a Katana 50. Use the acoustic channel on the amp, and keep all Katana settings at noon, and adjust to taste. This patch uses the Line 6 Epic Helix model for a mid-heavy high gain metal tone thru your Katana.
- 👇 Downloads: 317
- 🤘 Upvotes: 1
- Member: Jorge
- Device:
HX Stomp - Performance Type:
Plugged in Front of the Amp
Mayer with Boost and Mood
Here's a clean preset I made with 3 snapshots: 1. Mayer type clean 2. Clean with boost 3. Ambient Clean I used my PC+ so you will need to use an IR. Enjoy!
- 👇 Downloads: 1055
- 🤘 Upvotes: 1
- Member: Mystixboi
- Device:
HX Stomp - Performance Type:
Line 6 Powercab
Benizen Lead
TURN OFF HARDWARE COMPATIBILITY BEFORE IMPORTINGMade on 3.0 during beta testing.Poly Capo (stock settings, interval at -2), Horizon Drive (low gain, high level), Das Benizen Lead amp model, Greenback 25/XXL V30 cabs panned left, Field Coil/Lead 80 cabs panned right, Stereo Imager.
Youtube- 👇 Downloads: 170
- 🤘 Upvotes: 1
- Member: Alex Kenivel
- Device:
Helix Native - Performance Type:
Direct (Recording, Headphone, PA)
Silverchair - AbuseMe
Here's a preset for the Helix, featuring 4 snapshots to navigate through different parts of the song.
Youtube- 👇 Downloads: 58
- 🤘 Upvotes: 1
- Member: Helixman
- Device:
Helix Native - Performance Type:
Direct (Recording, Headphone, PA)
- 👇 Downloads: 142
- 🤘 Upvotes: 1
- Member: Madguitar78
- Device:
Helix LT - Performance Type:
Direct (Recording, Headphone, PA)
Dimed Tweed Les Paul
From Joost Assink: I had set myself the goal to master all the parts in the epic final solo of Hotel California in my downtime during this crisis. I found out there are 11 parts!! (6 electric guitars, 2 acoustic guitars, 1 bass part, the organ part and of course programming drums). Well, it took a little longer than expected. I recorded all electric guitars and the bass using line 6 helix into an Apollo X8. I recorded the acoustic guitars with a stereo set of Neumann KM184s and I mixed everything in the new Universal Audio Luna DAW. I used a custom patch based on the tweed amp with a custom IR for all the electric guitars and I use the standard Cali 1 bass preset for the bass guitar. For the solos, I enabled a tube screamer, and for the telecaster parts, I added the script mod phaser pedal. For the reggae rhythm, I enabled the Wah pedal in a fixed position and for the supporting electric guitar lines, I added a little bit of chorus. Here's a free link to the IR used in the Youtube video:
Youtube- 👇 Downloads: 379
- 🤘 Upvotes: 1
- Member: Jorge
- Device:
Helix Floor - Performance Type:
Direct (Recording, Headphone, PA)
Satisfaction Fuzz
The iconic fuzz tone from Keith Richards is here. Great Rolling Stones tone.
Youtube- 👇 Downloads: 271
- 🤘 Upvotes: 1
- Member: Jorge
- Device:
Helix Floor - Performance Type:
Direct (Recording, Headphone, PA)
| Patch | Device | Performance Type |
Description | Member | 👇 Downloads | 🤘 Upvotes |
|---|---|---|---|---|---|---|
| 5150 Crunch Lead Wah | HX Stomp | Line 6 Powercab | Super fun 5150 patch... not for chugging but is a great hard rock patch. It has 3 snapshots... 1. Rhythm 2. Lead 3. Lead with auto wah. This was made with my PowerCab Plus using a York Audio IR so you will need to keep that in mind. Enjoy!!! | Mystixboi | 792 | 1 |
|
RHCP - Throw Away Your TV
Youtube |
Helix Native | Direct (Recording, Headphone, PA) | Check it out!!!. This has 5 snapshots preset:SlapbackPhaserSlapback + PhaserSustain + SlapbackOBI wah Sample hold | Helixman | 108 | 1 |
| Silence | HX Stomp | 4 Cable Method | This utility patch is intended to reduce the hum and hiss of your noisy high gain amp. It is composed of 2 noise gates, one for your guitar and another for the amp's FX loop. The patch needs to run in the "4 Cable Method" to work properly. I use this patch to tame the hiss on my Mesa Boogie Mini… | Jorge | 239 | 1 |
| Epic Gain for Boss Katana 50 | HX Stomp | Plugged in Front of the Amp | Use this patch by plugging straight into a Katana 50. Use the acoustic channel on the amp, and keep all Katana settings at noon, and adjust to taste. This patch uses the Line 6 Epic Helix model for a mid-heavy high gain metal tone thru your Katana. | Jorge | 317 | 1 |
| Mayer with Boost and Mood | HX Stomp | Line 6 Powercab | Here's a clean preset I made with 3 snapshots: 1. Mayer type clean 2. Clean with boost 3. Ambient Clean I used my PC+ so you will need to use an IR. Enjoy! | Mystixboi | 1055 | 1 |
|
Benizen Lead
Youtube |
Helix Native | Direct (Recording, Headphone, PA) | TURN OFF HARDWARE COMPATIBILITY BEFORE IMPORTINGMade on 3.0 during beta testing.Poly Capo (stock settings, interval at -2), Horizon Drive (low gain, high level), Das Benizen Lead amp model, Greenback 25/XXL V30 cabs panned left, Field Coil/Lead 80 cabs panned right, Stereo Imager. | Alex Kenivel | 170 | 1 |
|
Silverchair - AbuseMe
Youtube |
Helix Native | Direct (Recording, Headphone, PA) | Here's a preset for the Helix, featuring 4 snapshots to navigate through different parts of the song. | Helixman | 58 | 1 |
|
SlashStock
Youtube |
Helix LT | Direct (Recording, Headphone, PA) | Used for Slask sound | Madguitar78 | 142 | 1 |
|
Dimed Tweed Les Paul
Youtube |
Helix Floor | Direct (Recording, Headphone, PA) | From Joost Assink: I had set myself the goal to master all the parts in the epic final solo of Hotel California in my downtime during this crisis. I found out there are 11 parts!! (6 electric guitars, 2 acoustic guitars, 1 bass part, the organ part and of course programming drums). Well, it took… | Jorge | 379 | 1 |
|
Satisfaction Fuzz
Youtube |
Helix Floor | Direct (Recording, Headphone, PA) | The iconic fuzz tone from Keith Richards is here. Great Rolling Stones tone. | Jorge | 271 | 1 |
Some Products That We Love
Brought to you by the Fluid Solo department of CommercePower your HX Stomp via USB
This handy cord allows you to power your HX Stomp from a USB port, so you can power it from a USB power bank or other power source.
Last seen around $23
Add 4 buttons to your HX Stomp Via Midi
The M-Vave Chocolate Plus is a versatile Midi and USB Host pedal that adds 4 footswitches to your Midi or USB capable devices such as HX Stomp. It is rechargeable and easily programmable, plus it can also be used in a wireless fashion.
Last seen for about $45
Valeton GP-5
This sub - $100 modeler and NAM profile player is truly an engineering marvel. It is easy to use and sounds killer.
Last seen for about $80