Fluid Solo - Free Patches for Line 6 Helix, HX Stomp, and Pod Go

Welcome!

You are using Fluid Solo in guest mode, which means you are free to browse - but you will need an account in order to upload or download patches. Signing up is easy and free - it only takes a minute. We do not spam you or sell your information.

With an account, you are able to comment on the conversations for patches and individual amps and effects. More importantly, signing up gets rid of this annoying message.

Fluid Solo supports all models of the Line 6 Helix family, including HX Effects, HX Stomp, and Pod Go. For more information, head on over to the FAQ.

Your Device

Here's what's new:

⭐ Pod Express Review
⭐ Line 6 Releases Helix 3.7 Update
⭐ Pod Go 2.0 Update is Here
⭐ Line 6 Releases Helix 3.6 Update
⭐ Looking for Some Good Free IRs?

View the full archive...

Green Day Dookie Tone

This stereo tone replicates Billie Joe's tone on Green Day's Dookie album pretty well. There's a compressor and boost available for a little extra oomph, but they're off by default because they're not really needed to get the album tone. I used a Les Paul to record the Soundcloud demo, you may want to try a Strat or P90 guitar for a little extra high end.

Soundcloud

👇 Downloads: 2270
🤘 Upvotes: 37
Member: Jorge
Performance Type:
Direct (Recording, Headphone, PA)

Silence

This utility patch is intended to reduce the hum and hiss of your noisy high gain amp. It is composed of 2 noise gates, one for your guitar and another for the amp's FX loop. The patch needs to run in the "4 Cable Method" to work properly. I use this patch to tame the hiss on my Mesa Boogie Mini Rectifier. It's a great amp but has a bit of hiss due to the high gain nature of the amp. By putting a noise gate in your amp's effects loop, you are mostly getting rid of any annoying hiss or hum that is in the amp's preamp section.

👇 Downloads: 200
🤘 Upvotes: 1
Member: Jorge
Performance Type:
4 Cable Method

DTS Rectified

This is how Dual Recto should sound when it's maxed out! :) Adjust the Gain from Amp and TS808 to your taste.

Soundcloud

👇 Downloads: 1437
🤘 Upvotes: 13
Member: Drop The Sun
Performance Type:
Direct (Recording, Headphone, PA)

Marshall Tone for Boss Katana 50

Use this patch by plugging straight into a Katana 50. Use the acoustic channel on the amp, and keep all Katana settings at noon, and adjust to taste. This patch uses the "Brit Plexi Jump" Helix model for a nice juicy Marshall roar thru your Katana.

👇 Downloads: 445
🤘 Upvotes: 4
Member: Jorge
Performance Type:
Plugged in Front of the Amp

Epic Gain for Boss Katana 50

Use this patch by plugging straight into a Katana 50. Use the acoustic channel on the amp, and keep all Katana settings at noon, and adjust to taste. This patch uses the Line 6 Epic Helix model for a mid-heavy high gain metal tone thru your Katana.

👇 Downloads: 260
🤘 Upvotes: 1
Member: Jorge
Performance Type:
Plugged in Front of the Amp

Fender Twin Tone for Boss Katana 50

Use this patch by plugging straight into a Katana 50. Use the acoustic channel on the amp, and keep all Katana settings at noon, and adjust to taste. This patch uses the Fender Twin (normal channel) Helix model for a nice crisp Fender tone thru your Katana. Step on the Teemah! for a nice fat lead tone.

👇 Downloads: 418
🤘 Upvotes: 3
Member: Jorge
Performance Type:
Plugged in Front of the Amp

HX Stomp as Input for Helix Native

This utility patch is used for running an HX Stomp into a Mac or PC for using it as an interface to Helix Native. In your DAW, set the input to input 5 on the HX Stomp and run this patch. Turn on monitoring in the DAW, and now you will only hear Helix Native in your headphones or speakers.

👇 Downloads: 425
🤘 Upvotes: 8
Member: Jorge
Performance Type:
Direct (Recording, Headphone, PA)

Slash Mod 2204

Most of the Slash patches I get all sound thin and frankly a little weird. He has a very straightforward tone. I tried to capture the spirit of his tone here. It's a bit fuzzy but I think it works well in a mix or for some headphone soloing. Sorry for the horrible soloing in my SoundCloud demo. My 6 year old thinks I sound great....

Soundcloud

👇 Downloads: 2804
🤘 Upvotes: 44
Member: Jorge
Performance Type:
Direct (Recording, Headphone, PA)

Guitar Goes Bass

Who needs a bass player anyway? Not you if you've got this patch. Made it with a simple SG, and now I sound like a thundering bass god. Now you can too.

Soundcloud

👇 Downloads: 1036
🤘 Upvotes: 11
Member: Jorge
Performance Type:
Direct (Recording, Headphone, PA)

Seriously WTF

I accidentally created this pitch-shifting, time bending monster while working on a Shiva patch.

Soundcloud

👇 Downloads: 539
🤘 Upvotes: 2
Member: Jorge
Performance Type:
Direct (Recording, Headphone, PA)

Patch	Performance Type	Description	Member	👇 Downloads	🤘 Upvotes
Green Day Dookie Tone Soundcloud	Direct (Recording, Headphone, PA)	This stereo tone replicates Billie Joe's tone on Green Day's Dookie album pretty well. There's a compressor and boost available for a little extra oomph, but they're off by default because they're not really needed to get the album tone. I used a Les Paul to record the Soundcloud demo, you may …	Jorge	2270	37
Silence	4 Cable Method	This utility patch is intended to reduce the hum and hiss of your noisy high gain amp. It is composed of 2 noise gates, one for your guitar and another for the amp's FX loop. The patch needs to run in the "4 Cable Method" to work properly. I use this patch to tame the hiss on my Mesa Boogie Mini…	Jorge	200	1
DTS Rectified Soundcloud	Direct (Recording, Headphone, PA)	This is how Dual Recto should sound when it's maxed out! :) Adjust the Gain from Amp and TS808 to your taste.	Drop The Sun	1437	13
Marshall Tone for Boss Katana 50	Plugged in Front of the Amp	Use this patch by plugging straight into a Katana 50. Use the acoustic channel on the amp, and keep all Katana settings at noon, and adjust to taste. This patch uses the "Brit Plexi Jump" Helix model for a nice juicy Marshall roar thru your Katana.	Jorge	445	4
Epic Gain for Boss Katana 50	Plugged in Front of the Amp	Use this patch by plugging straight into a Katana 50. Use the acoustic channel on the amp, and keep all Katana settings at noon, and adjust to taste. This patch uses the Line 6 Epic Helix model for a mid-heavy high gain metal tone thru your Katana.	Jorge	260	1
Fender Twin Tone for Boss Katana 50	Plugged in Front of the Amp	Use this patch by plugging straight into a Katana 50. Use the acoustic channel on the amp, and keep all Katana settings at noon, and adjust to taste. This patch uses the Fender Twin (normal channel) Helix model for a nice crisp Fender tone thru your Katana. Step on the Teemah! for a nice fat lea…	Jorge	418	3
HX Stomp as Input for Helix Native	Direct (Recording, Headphone, PA)	This utility patch is used for running an HX Stomp into a Mac or PC for using it as an interface to Helix Native. In your DAW, set the input to input 5 on the HX Stomp and run this patch. Turn on monitoring in the DAW, and now you will only hear Helix Native in your headphones or speakers.	Jorge	425	8
Slash Mod 2204 Soundcloud	Direct (Recording, Headphone, PA)	Most of the Slash patches I get all sound thin and frankly a little weird. He has a very straightforward tone. I tried to capture the spirit of his tone here. It's a bit fuzzy but I think it works well in a mix or for some headphone soloing. Sorry for the horrible soloing in my SoundCloud demo. …	Jorge	2804	44
Guitar Goes Bass Soundcloud	Direct (Recording, Headphone, PA)	Who needs a bass player anyway? Not you if you've got this patch. Made it with a simple SG, and now I sound like a thundering bass god. Now you can too.	Jorge	1036	11
Seriously WTF Soundcloud	Direct (Recording, Headphone, PA)	I accidentally created this pitch-shifting, time bending monster while working on a Shiva patch.	Jorge	539	2