Fluid Solo - Free Patches for Line 6 Helix Stadiun, Helix, HX Stomp, HX Effects and Pod Go

Welcome!

You are using Fluid Solo in guest mode, which means you are free to browse - but you will need an account in order to upload or download patches. Signing up is easy and free - it only takes a minute. We do not spam you or sell your information.

With an account, you are able to comment on the conversations for patches and individual amps and effects. More importantly, signing up gets rid of this annoying message.

Fluid Solo supports all models of the Line 6 Helix family, including HX Effects, HX Stomp, and Pod Go. For more information, head on over to the FAQ.

Your Device

Here's what's new:

⭐ Helix Stadium Support is Live!
⭐ Thoughts On The New Helix Stadium
⭐ Line 6 Releases Pod Go 2.5 Update
⭐ Line 6 Release Helix 3.8 Update
⭐ Pod Express Review

View the full archive...

Grammatico Brt

This is the same patch made by Jorge but for the HX Stomp, I used my app (https://sensationnel-gerard-26922.herokuapp.com/) to visualize the parameters and recreated the patch. I sounds really good.

👇 Downloads: 341
🤘 Upvotes: 2
Member: Yeraym
Device:
HX Stomp
Performance Type:
Direct (Recording, Headphone, PA)

Hey Hey My My

Heir Apparent into the Bass Octaver into the Fullerton Normal. No IRs needed.Youtube link is to the original recording.

Youtube

👇 Downloads: 220
🤘 Upvotes: 1
Member: Rocco Crocco
Device:
Helix Floor
Performance Type:
Direct (Recording, Headphone, PA)

Grammatico Brt

This is the default patch for the Grammatico Brt model from the stock presets of the Helix 2.8 update. This may be useful to you if you didn't overwrite the presets on your device.You must be running 2.8 Firmware, or the 1.8 firmware on Helix Native.

👇 Downloads: 108
🤘 Upvotes: 0
Member: Jorge
Device:
Helix Floor
Performance Type:
Direct (Recording, Headphone, PA)

Fullerton Nrm

This is the default patch for the Fullerton Nrm model from the stock presets of the Helix 2.8 update. This may be useful to you if you didn't overwrite the presets on your device. You must be running 2.8 Firmware, or the 1.8 firmware on Helix Native.

👇 Downloads: 132
🤘 Upvotes: 1
Member: Jorge
Device:
Helix Floor
Performance Type:
Direct (Recording, Headphone, PA)

Revv Gen Red

This is the default patch for the Revv Gen Red model from the stock presets of the Helix 2.8 update. This may be useful to you if you didn't overwrite the presets on your device.You must be running 2.8 Firmware, or the 1.8 firmware on Helix Native.

👇 Downloads: 141
🤘 Upvotes: 1
Member: Jorge
Device:
Helix Floor
Performance Type:
Direct (Recording, Headphone, PA)

Hellbound Fender for Powercab

This tone is an attempt to capture the live tone of one of my favorite guitarists, Luis from Hellbound Hayride. It's a juicy, dirty Fender sound with some delay and reverb. The tone does not have a cab emulation in it, it uses the Powercab for that.Powercab SettingsSet the Powercab to the "Vintage" (Celestion Vintage 30) speaker emulation and turn it up!

Soundcloud

👇 Downloads: 438
🤘 Upvotes: 1
Member: Jorge
Device:
HX Stomp
Performance Type:
Line 6 Powercab

Placater for Powercab

Get the blood pumping into your Powercab and turn it into a hard-rocking gain machine. Powercab Settings Set the Powercab to the "Vintage" (Celestion Vintage 30) speaker emulation and turn it up!

👇 Downloads: 398
🤘 Upvotes: 0
Member: Jorge
Device:
HX Stomp
Performance Type:
Line 6 Powercab

Rock Bassman

I created this patch after listening to a cool pop punk, 50's inspired band at a local club. The guitar player had epic tone, using a Les Paul into a Bassman head going into a 2x12 fender cab. I did my best to reproduce his tone, a very simple but hard hitting rock n roll tone.Play the neck pickup and reduce the volume a bit on the guitar, and you're in a nice blues sound as well.

👇 Downloads: 654
🤘 Upvotes: 2
Member: Jorge
Device:
HX Stomp
Performance Type:
Direct (Recording, Headphone, PA)

Placate

This is my main church preset. This uses the Placater Clean and Placater Dirty models to provide four snapshots of clean to hi-gain tone. Two additional snapshots are for swells and ambient tones. The preset uses an IR (OwnHammer 212 VC30 BLU-93 OH1-07) but replace with the default Placater cabinet and should be about the same. Dialed in with a PRS S2 Single Cut (humbuckers) w/ input pad on.

👇 Downloads: 484
🤘 Upvotes: 2
Member: Jonandtice
Device:
Helix LT
Performance Type:
Direct (Recording, Headphone, PA)

Soldano

My take on Soldano amp with 3 gain stage. The first is the amp drive only (FS1), the second a Boost (FS2) and the third a TS style OD (FS4) - Sounds perfect with a Gibson ES-335, huge tone with tamed low ends and OD that cuts though the mix.

👇 Downloads: 2137
🤘 Upvotes: 13
Member: Gl4th
Device:
HX Stomp
Performance Type:
Direct (Recording, Headphone, PA)

Patch	Device	Performance Type	Description	Member	👇 Downloads	🤘 Upvotes
Grammatico Brt	HX Stomp	Direct (Recording, Headphone, PA)	This is the same patch made by Jorge but for the HX Stomp, I used my app (https://sensationnel-gerard-26922.herokuapp.com/) to visualize the parameters and recreated the patch. I sounds really good.	Yeraym	341	2
Hey Hey My My Youtube	Helix Floor	Direct (Recording, Headphone, PA)	Heir Apparent into the Bass Octaver into the Fullerton Normal. No IRs needed.Youtube link is to the original recording.	Rocco Crocco	220	1
Grammatico Brt	Helix Floor	Direct (Recording, Headphone, PA)	This is the default patch for the Grammatico Brt model from the stock presets of the Helix 2.8 update. This may be useful to you if you didn't overwrite the presets on your device.You must be running 2.8 Firmware, or the 1.8 firmware on Helix Native.	Jorge	108	0
Fullerton Nrm	Helix Floor	Direct (Recording, Headphone, PA)	This is the default patch for the Fullerton Nrm model from the stock presets of the Helix 2.8 update. This may be useful to you if you didn't overwrite the presets on your device. You must be running 2.8 Firmware, or the 1.8 firmware on Helix Native.	Jorge	132	1
Revv Gen Red	Helix Floor	Direct (Recording, Headphone, PA)	This is the default patch for the Revv Gen Red model from the stock presets of the Helix 2.8 update. This may be useful to you if you didn't overwrite the presets on your device.You must be running 2.8 Firmware, or the 1.8 firmware on Helix Native.	Jorge	141	1
Hellbound Fender for Powercab Soundcloud	HX Stomp	Line 6 Powercab	This tone is an attempt to capture the live tone of one of my favorite guitarists, Luis from Hellbound Hayride. It's a juicy, dirty Fender sound with some delay and reverb. The tone does not have a cab emulation in it, it uses the Powercab for that.Powercab SettingsSet the Powercab to the…	Jorge	438	1
Placater for Powercab	HX Stomp	Line 6 Powercab	Get the blood pumping into your Powercab and turn it into a hard-rocking gain machine. Powercab Settings Set the Powercab to the "Vintage" (Celestion Vintage 30) speaker emulation and turn it up!	Jorge	398	0
Rock Bassman	HX Stomp	Direct (Recording, Headphone, PA)	I created this patch after listening to a cool pop punk, 50's inspired band at a local club. The guitar player had epic tone, using a Les Paul into a Bassman head going into a 2x12 fender cab. I did my best to reproduce his tone, a very simple but hard hitting rock n roll tone.Play the neck p…	Jorge	654	2
Placate	Helix LT	Direct (Recording, Headphone, PA)	This is my main church preset. This uses the Placater Clean and Placater Dirty models to provide four snapshots of clean to hi-gain tone. Two additional snapshots are for swells and ambient tones. The preset uses an IR (OwnHammer 212 VC30 BLU-93 OH1-07) but replace with the default Placater cabinet…	Jonandtice	484	2
Soldano	HX Stomp	Direct (Recording, Headphone, PA)	My take on Soldano amp with 3 gain stage. The first is the amp drive only (FS1), the second a Boost (FS2) and the third a TS style OD (FS4) - Sounds perfect with a Gibson ES-335, huge tone with tamed low ends and OD that cuts though the mix.	Gl4th	2137	13