Welcome!
You are using Fluid Solo in guest mode, which means you are free to browse patches and Proxy™ Clones, - but you will need an account in order to download our free downloads. Signing up is easy and free - it only takes a minute. We do not spam you or sell your information.
Fluid Solo supports all models of the Line 6 Helix family, including Helix Stadium, HX Effects, HX Stomp, and Pod Go. For more information, head on over to the FAQ.
Sign up for an account now Log in if you're already a memberYour Device
Here's what's new:
The Helix for the Next 10 Years
JOHNAMAYERTRIX
(Reposted with permission from AndrewUtz on CustomTone.com) A John Mayer Tone, referencing Slow Dancing In A Burning Room. In this patch I used some basic stuff that I know John has used (or the closest thing to it I could find). I know live he has used dumbles along with a fender bandmaster, so for this I used a split path and ran a Litigator and a Twin Reverb at the same time. As far as the cabs go I tried my best to match how I know that continuum was recorded, I typically use red wire IR's but for you guys I used the equivalent Helix cabs. I put a dual cab block of the same cab but one is mic'd with a 57 and the other a beyerdynamic 160 (he really used an M88). Looks like he also used U87 or 67 room mics but alas it wouldn't let me add in another cab block. To compensate for this I used a room reverb at the end of the chain. I also put the Spring reverb before the cabs to simulate the acutal outboard fender reverb tanks john has used in the past. This patch probably needs some tweaking to make it like whatever you like, but I definitely think this is a good starting point for a Mayer like tone.
- 👇 Downloads: 677
- 🤘 Upvotes: 5
- Member: Jorge
- Device:
Helix Floor - Performance Type:
Direct (Recording, Headphone, PA)
Silence
This utility patch is intended to reduce the hum and hiss of your noisy high gain amp. It is composed of 2 noise gates, one for your guitar and another for the amp's FX loop. The patch needs to run in the "4 Cable Method" to work properly. I use this patch to tame the hiss on my Mesa Boogie Mini Rectifier. It's a great amp but has a bit of hiss due to the high gain nature of the amp. By putting a noise gate in your amp's effects loop, you are mostly getting rid of any annoying hiss or hum that is in the amp's preamp section.
- 👇 Downloads: 239
- 🤘 Upvotes: 1
- Member: Jorge
- Device:
HX Stomp - Performance Type:
4 Cable Method
DTS Rectified
This is how Dual Recto should sound when it's maxed out! :) Adjust the Gain from Amp and TS808 to your taste.
Soundcloud- 👇 Downloads: 1927
- 🤘 Upvotes: 14
- Member: Drop The Sun
- Device:
HX Stomp - Performance Type:
Direct (Recording, Headphone, PA)
Marshall Tone for Boss Katana 50
Use this patch by plugging straight into a Katana 50. Use the acoustic channel on the amp, and keep all Katana settings at noon, and adjust to taste. This patch uses the "Brit Plexi Jump" Helix model for a nice juicy Marshall roar thru your Katana.
- 👇 Downloads: 538
- 🤘 Upvotes: 4
- Member: Jorge
- Device:
HX Stomp - Performance Type:
Plugged in Front of the Amp
Fender Twin Tone for Boss Katana 50
Use this patch by plugging straight into a Katana 50. Use the acoustic channel on the amp, and keep all Katana settings at noon, and adjust to taste. This patch uses the Fender Twin (normal channel) Helix model for a nice crisp Fender tone thru your Katana. Step on the Teemah! for a nice fat lead tone.
- 👇 Downloads: 526
- 🤘 Upvotes: 4
- Member: Jorge
- Device:
HX Stomp - Performance Type:
Plugged in Front of the Amp
Epic Gain for Boss Katana 50
Use this patch by plugging straight into a Katana 50. Use the acoustic channel on the amp, and keep all Katana settings at noon, and adjust to taste. This patch uses the Line 6 Epic Helix model for a mid-heavy high gain metal tone thru your Katana.
- 👇 Downloads: 316
- 🤘 Upvotes: 1
- Member: Jorge
- Device:
HX Stomp - Performance Type:
Plugged in Front of the Amp
- 👇 Downloads: 510
- 🤘 Upvotes: 3
- Member: Jorge
- Device:
Helix Native - Performance Type:
Direct (Recording, Headphone, PA)
Shimmering
A nice patch for fingerpicking and playing along with an acoustic guitar. Soundcloud demo recorded on a Les Paul with the bridge pickup. Might sound even better with single coils.
Soundcloud- 👇 Downloads: 346
- 🤘 Upvotes: 1
- Member: Jorge
- Device:
Helix Native - Performance Type:
Direct (Recording, Headphone, PA)
HX Stomp as Input for Helix Native
This utility patch is used for running an HX Stomp into a Mac or PC for using it as an interface to Helix Native. In your DAW, set the input to input 5 on the HX Stomp and run this patch. Turn on monitoring in the DAW, and now you will only hear Helix Native in your headphones or speakers.
- 👇 Downloads: 503
- 🤘 Upvotes: 9
- Member: Jorge
- Device:
HX Stomp - Performance Type:
Direct (Recording, Headphone, PA)
- 👇 Downloads: 389
- 🤘 Upvotes: 3
- Member: Jorge
- Device:
Helix Native - Performance Type:
Direct (Recording, Headphone, PA)
| Patch | Device | Performance Type |
Description | Member | 👇 Downloads | 🤘 Upvotes |
|---|---|---|---|---|---|---|
| JOHNAMAYERTRIX | Helix Floor | Direct (Recording, Headphone, PA) | (Reposted with permission from AndrewUtz on CustomTone.com) A John Mayer Tone, referencing Slow Dancing In A Burning Room. In this patch I used some basic stuff that I know John has used (or the closest thing to it I could find). I know live he has used dumbles along with a fender bandmaster,… | Jorge | 677 | 5 |
| Silence | HX Stomp | 4 Cable Method | This utility patch is intended to reduce the hum and hiss of your noisy high gain amp. It is composed of 2 noise gates, one for your guitar and another for the amp's FX loop. The patch needs to run in the "4 Cable Method" to work properly. I use this patch to tame the hiss on my Mesa Boogie Mini… | Jorge | 239 | 1 |
|
DTS Rectified
Soundcloud |
HX Stomp | Direct (Recording, Headphone, PA) | This is how Dual Recto should sound when it's maxed out! :) Adjust the Gain from Amp and TS808 to your taste. | Drop The Sun | 1927 | 14 |
| Marshall Tone for Boss Katana 50 | HX Stomp | Plugged in Front of the Amp | Use this patch by plugging straight into a Katana 50. Use the acoustic channel on the amp, and keep all Katana settings at noon, and adjust to taste. This patch uses the "Brit Plexi Jump" Helix model for a nice juicy Marshall roar thru your Katana. | Jorge | 538 | 4 |
| Fender Twin Tone for Boss Katana 50 | HX Stomp | Plugged in Front of the Amp | Use this patch by plugging straight into a Katana 50. Use the acoustic channel on the amp, and keep all Katana settings at noon, and adjust to taste. This patch uses the Fender Twin (normal channel) Helix model for a nice crisp Fender tone thru your Katana. Step on the Teemah! for a nice fat lea… | Jorge | 526 | 4 |
| Epic Gain for Boss Katana 50 | HX Stomp | Plugged in Front of the Amp | Use this patch by plugging straight into a Katana 50. Use the acoustic channel on the amp, and keep all Katana settings at noon, and adjust to taste. This patch uses the Line 6 Epic Helix model for a mid-heavy high gain metal tone thru your Katana. | Jorge | 316 | 1 |
|
Angry 5150
Soundcloud |
Helix Native | Direct (Recording, Headphone, PA) | This pissed off 5150 is perfect for detuned metal chord work. | Jorge | 510 | 3 |
|
Shimmering
Soundcloud |
Helix Native | Direct (Recording, Headphone, PA) | A nice patch for fingerpicking and playing along with an acoustic guitar. Soundcloud demo recorded on a Les Paul with the bridge pickup. Might sound even better with single coils. | Jorge | 346 | 1 |
| HX Stomp as Input for Helix Native | HX Stomp | Direct (Recording, Headphone, PA) | This utility patch is used for running an HX Stomp into a Mac or PC for using it as an interface to Helix Native. In your DAW, set the input to input 5 on the HX Stomp and run this patch. Turn on monitoring in the DAW, and now you will only hear Helix Native in your headphones or speakers. | Jorge | 503 | 9 |
|
Dirty Plexi
Soundcloud |
Helix Native | Direct (Recording, Headphone, PA) | Versatile dirty Marshall sound. | Jorge | 389 | 3 |
Some Products That We Love
Brought to you by the Fluid Solo department of CommerceRechargeable FRFR Amp For Your Modeler
The new Headrush FRFR Go is a cool solution to take your modeler tones on the go for practice use.
Last seen at $150
Valeton GP-5
This sub - $100 modeler and NAM profile player is truly an engineering marvel. It is easy to use and sounds killer.
Last seen for about $80
Extra Power Cable for your HX Stomp
I've been using one of these power supplies permanently zip-tied to my pedalboard, and it's been very handy to keep the original power supply around for off-board usage. Plus it's cheap and works well.
Last seen around $16