Fluid Solo - Free Patches for Line 6 Helix Stadiun, Helix, HX Stomp, HX Effects and Pod Go

Welcome!

You are using Fluid Solo in guest mode, which means you are free to browse - but you will need an account in order to upload or download patches. Signing up is easy and free - it only takes a minute. We do not spam you or sell your information.

With an account, you are able to comment on the conversations for patches and individual amps and effects. More importantly, signing up gets rid of this annoying message.

Fluid Solo supports all models of the Line 6 Helix family, including HX Effects, HX Stomp, and Pod Go. For more information, head on over to the FAQ.

Your Device

Here's what's new:

⭐ Helix Stadium Support is Live!
⭐ Thoughts On The New Helix Stadium
⭐ Line 6 Releases Pod Go 2.5 Update
⭐ Line 6 Release Helix 3.8 Update
⭐ Pod Express Review

View the full archive...

AC 30 Tone for Boss Katana Amps

Use this patch by plugging straight into a Katana 50. Use the acoustic channel on the amp, and keep all Katana settings at noon, and adjust to taste. This patch uses the "A30 Fawn Brt" Helix model for a chimey AC30 tone. Use the Klon for some nice hot overdrive. There's some spring reverb included to round out the tone. Sounds great on the Katana combo.

👇 Downloads: 605
🤘 Upvotes: 3
Member: Jorge
Device:
HX Stomp
Performance Type:
Plugged in Front of the Amp

Mike Ness Tone

This is the HX Stomp version of this tone - there's also a version for the Helix available here by selecting the Helix as your device. This is a very good approximation of Mike Ness's Tone on the Social Distortion albums. The recipe is iconic - a dirt pedal into a Bassman head, then into Marshall cabinets. The sample clip was played on a legit Les Paul with P90 pickups - you need this to get the real deal.

Soundcloud

👇 Downloads: 748
🤘 Upvotes: 7
Member: Jorge
Device:
HX Stomp
Performance Type:
Direct (Recording, Headphone, PA)

Mike Ness Tone

This is a very good aproximation of Mike Ness's Tone on the Social Distortion albums. The recipe is iconic - a dirt pedal into a Bassman head, then into Marshall cabinets. The sample clip was played on a legit Les Paul with P90 pickups - you need this to get the real deal.

Soundcloud

👇 Downloads: 168
🤘 Upvotes: 2
Member: Jorge
Device:
Helix Floor
Performance Type:
Direct (Recording, Headphone, PA)

Bonamassa Live

This is a modified version of bart2580's "Bonamassa 1959LP" patch on customtone. I modified it to use a built-in cab rather an an IR, and made a few smaller tweaks as well. The delay is very present in the mix, so you my want to tame it a bit, I like it.

Soundcloud

👇 Downloads: 517
🤘 Upvotes: 4
Member: Jorge
Device:
Helix Native
Performance Type:
Direct (Recording, Headphone, PA)

Green Day Dookie Tone

This stereo tone replicates Billie Joe's tone on Green Day's Dookie album pretty well. There's a compressor and boost available for a little extra oomph, but they're off by default because they're not really needed to get the album tone. I used a Les Paul to record the Soundcloud demo, you may want to try a Strat or P90 guitar for a little extra high end.

Soundcloud

👇 Downloads: 2937
🤘 Upvotes: 41
Member: Jorge
Device:
HX Stomp
Performance Type:
Direct (Recording, Headphone, PA)

JOHNAMAYERTRIX

(Reposted with permission from AndrewUtz on CustomTone.com) A John Mayer Tone, referencing Slow Dancing In A Burning Room. In this patch I used some basic stuff that I know John has used (or the closest thing to it I could find). I know live he has used dumbles along with a fender bandmaster, so for this I used a split path and ran a Litigator and a Twin Reverb at the same time. As far as the cabs go I tried my best to match how I know that continuum was recorded, I typically use red wire IR's but for you guys I used the equivalent Helix cabs. I put a dual cab block of the same cab but one is mic'd with a 57 and the other a beyerdynamic 160 (he really used an M88). Looks like he also used U87 or 67 room mics but alas it wouldn't let me add in another cab block. To compensate for this I used a room reverb at the end of the chain. I also put the Spring reverb before the cabs to simulate the acutal outboard fender reverb tanks john has used in the past. This patch probably needs some tweaking to make it like whatever you like, but I definitely think this is a good starting point for a Mayer like tone.

👇 Downloads: 611
🤘 Upvotes: 4
Member: Jorge
Device:
Helix Floor
Performance Type:
Direct (Recording, Headphone, PA)

Silence

This utility patch is intended to reduce the hum and hiss of your noisy high gain amp. It is composed of 2 noise gates, one for your guitar and another for the amp's FX loop. The patch needs to run in the "4 Cable Method" to work properly. I use this patch to tame the hiss on my Mesa Boogie Mini Rectifier. It's a great amp but has a bit of hiss due to the high gain nature of the amp. By putting a noise gate in your amp's effects loop, you are mostly getting rid of any annoying hiss or hum that is in the amp's preamp section.

👇 Downloads: 234
🤘 Upvotes: 1
Member: Jorge
Device:
HX Stomp
Performance Type:
4 Cable Method

DTS Rectified

This is how Dual Recto should sound when it's maxed out! :) Adjust the Gain from Amp and TS808 to your taste.

Soundcloud

👇 Downloads: 1851
🤘 Upvotes: 13
Member: Drop The Sun
Device:
HX Stomp
Performance Type:
Direct (Recording, Headphone, PA)

Fender Twin Tone for Boss Katana 50

Use this patch by plugging straight into a Katana 50. Use the acoustic channel on the amp, and keep all Katana settings at noon, and adjust to taste. This patch uses the Fender Twin (normal channel) Helix model for a nice crisp Fender tone thru your Katana. Step on the Teemah! for a nice fat lead tone.

👇 Downloads: 499
🤘 Upvotes: 4
Member: Jorge
Device:
HX Stomp
Performance Type:
Plugged in Front of the Amp

Marshall Tone for Boss Katana 50

Use this patch by plugging straight into a Katana 50. Use the acoustic channel on the amp, and keep all Katana settings at noon, and adjust to taste. This patch uses the "Brit Plexi Jump" Helix model for a nice juicy Marshall roar thru your Katana.

👇 Downloads: 526
🤘 Upvotes: 4
Member: Jorge
Device:
HX Stomp
Performance Type:
Plugged in Front of the Amp

Patch	Device	Performance Type	Description	Member	👇 Downloads	🤘 Upvotes
AC 30 Tone for Boss Katana Amps	HX Stomp	Plugged in Front of the Amp	Use this patch by plugging straight into a Katana 50. Use the acoustic channel on the amp, and keep all Katana settings at noon, and adjust to taste. This patch uses the "A30 Fawn Brt" Helix model for a chimey AC30 tone. Use the Klon for some nice hot overdrive. There's some spring reverb includ…	Jorge	605	3
Mike Ness Tone Soundcloud	HX Stomp	Direct (Recording, Headphone, PA)	This is the HX Stomp version of this tone - there's also a version for the Helix available here by selecting the Helix as your device. This is a very good approximation of Mike Ness's Tone on the Social Distortion albums. The recipe is iconic - a dirt pedal into a Bassman head, then into Marshal…	Jorge	748	7
Mike Ness Tone Soundcloud	Helix Floor	Direct (Recording, Headphone, PA)	This is a very good aproximation of Mike Ness's Tone on the Social Distortion albums. The recipe is iconic - a dirt pedal into a Bassman head, then into Marshall cabinets. The sample clip was played on a legit Les Paul with P90 pickups - you need this to get the real deal.	Jorge	168	2
Bonamassa Live Soundcloud	Helix Native	Direct (Recording, Headphone, PA)	This is a modified version of bart2580's "Bonamassa 1959LP" patch on customtone. I modified it to use a built-in cab rather an an IR, and made a few smaller tweaks as well. The delay is very present in the mix, so you my want to tame it a bit, I like it.	Jorge	517	4
Green Day Dookie Tone Soundcloud	HX Stomp	Direct (Recording, Headphone, PA)	This stereo tone replicates Billie Joe's tone on Green Day's Dookie album pretty well. There's a compressor and boost available for a little extra oomph, but they're off by default because they're not really needed to get the album tone. I used a Les Paul to record the Soundcloud demo, you may …	Jorge	2937	41
JOHNAMAYERTRIX	Helix Floor	Direct (Recording, Headphone, PA)	(Reposted with permission from AndrewUtz on CustomTone.com) A John Mayer Tone, referencing Slow Dancing In A Burning Room. In this patch I used some basic stuff that I know John has used (or the closest thing to it I could find). I know live he has used dumbles along with a fender bandmaster,…	Jorge	611	4
Silence	HX Stomp	4 Cable Method	This utility patch is intended to reduce the hum and hiss of your noisy high gain amp. It is composed of 2 noise gates, one for your guitar and another for the amp's FX loop. The patch needs to run in the "4 Cable Method" to work properly. I use this patch to tame the hiss on my Mesa Boogie Mini…	Jorge	234	1
DTS Rectified Soundcloud	HX Stomp	Direct (Recording, Headphone, PA)	This is how Dual Recto should sound when it's maxed out! :) Adjust the Gain from Amp and TS808 to your taste.	Drop The Sun	1851	13
Fender Twin Tone for Boss Katana 50	HX Stomp	Plugged in Front of the Amp	Use this patch by plugging straight into a Katana 50. Use the acoustic channel on the amp, and keep all Katana settings at noon, and adjust to taste. This patch uses the Fender Twin (normal channel) Helix model for a nice crisp Fender tone thru your Katana. Step on the Teemah! for a nice fat lea…	Jorge	499	4
Marshall Tone for Boss Katana 50	HX Stomp	Plugged in Front of the Amp	Use this patch by plugging straight into a Katana 50. Use the acoustic channel on the amp, and keep all Katana settings at noon, and adjust to taste. This patch uses the "Brit Plexi Jump" Helix model for a nice juicy Marshall roar thru your Katana.	Jorge	526	4